Fire-rated panels · walls
Stone wool sandwich wall panels
Two coated steel skins bonded to a stone wool core, fixed to the girts of the steel frame – the external wall and its fire performance arrive as one product.
- Stone (mineral) wool, non-combustible
- Core
- External walls, fire walls
- Use
- Per tested system and thickness
- Rating
Fornito da World Steel con il vostro edificio in acciaio o separatamente – un ordine, una spedizione, un partner.
Panoramica
Informazioni su Stone wool sandwich wall panels
Stone wool cores do not add fuel to a fire; the reaction-to-fire class of the whole panel (for example A2-s1,d0 under EN 13501-1) depends on the facings, adhesive and coating.
Fire resistance (EI) is a property of the tested wall system – panel thickness, core density, joints, fixings and supporting steel – classified under EN 13501-2 from EN 1364-1 tests, or AS 1530.4 / ASTM E119 elsewhere.
Insurer approvals such as FM 4880/4881 or LPS 1181 are panel-specific and are checked when the insurer requires them.
Vantaggi principali
- Non-combustible core
- Fire resistance and insulation in one layer
- Fast, dry installation on steel girts
- Good acoustic performance
World Steel · hub per l'involucro edilizio
Come utilizziamo Stone wool sandwich wall panels negli edifici in acciaio
World Steel supplies wall panels with the steel frame: girt spacing, panel spans, flashings and fixings are detailed in the same model so the tested system is reproduced on site.
Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.
- 01Specificato insieme alla struttura – spessore, densità e rivestimento adeguati al progetto di copertura, pareti e antincendio.
- 02Quantità ricavate dallo stesso modello 3D di acciaio, arcarecci e rivestimenti.
- 03Imballato e spedito con il pacchetto acciaio – un unico programma di consegna in cantiere.
Applicazioni
Dove si usa Stone wool sandwich wall panels
- Industrial and manufacturing buildings
- Logistics and cold-chain facilities
- Fire walls between compartments
Dati tecnici
Stone wool sandwich wall panels – proprietà tecniche
Typical properties and standards
| Proprietà | Unità | Valore |
|---|---|---|
| Core material | — | Stone wool, fibres orientated for strength |
| Thickness range | mm | Typically 50 – 200, by thermal and fire requirement |
| Reaction to fire | — | EN 13501-1 · ASTM E84 · AS 1530.3 / AS 5113 for façades |
| Fire resistance | — | EN 1364-1 / EN 13501-2 · ASTM E119 · AS 1530.4 – per tested system |
| Insurer approvals | — | FM 4880 / 4881, LPS 1181 – where required |
Valori pubblicati dal produttore per questo mercato. Prima dell'ordine verificate sempre la scheda tecnica aggiornata e le approvazioni richieste per il vostro progetto.
Fire-rated panels
Prodotti correlati
Fire-rated panels · roofsStone wool sandwich roof panelsVedi prodotto →
Fire-rated panels · interiorsFire-rated partition and ceiling panelsVedi prodotto →
Fire-rated panels · compartment wallsFire compartment wall systemsVedi prodotto →← Fire-rated sandwich panelsFire-Rated Building Systems – Panels, Doors, Glazing, Shutters and Curtains →
FAQ
Domande frequenti
Does a stone wool core make the wall fire-rated?
Not on its own. A non-combustible core is a material property; a fire-resistance rating comes from a tested wall system with its thickness, joints and fixings.
Is this product certified?
Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.
Un unico partner per struttura e involucro
Inviateci i disegni o il computo metrico – quotiamo insieme acciaio, isolamento, lastre e controsoffitti e li spediamo in un unico pacchetto.
