ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
Imágenes de productos: el fabricante (oficiales).
Firestop · penetration and joint seals
Firestop mortars
A strong, permanent seal for large, busy penetrations – poured or trowelled around the services.
- Penetrations and joints
- Use
- EI / F-T ratings per test
- Classification
- Tested with the wall or floor
- System
Suministrado por World Steel con su edificio de acero o por separado – un pedido, un envío, un socio.
Resumen
Acerca de Firestop mortars
Mortars seal large openings with mixed services and can be loaded on floors; the tested system defines opening size, service types and mortar depth.
Penetration seals are tested to EN 1366-3 (classified under EN 13501-2), ASTM E814 / UL 1479 (F and T ratings) or AS 1530.4.
Plastic pipes usually need collars or wraps in addition to the mortar.
Ventajas principales
- Seals large mixed penetrations
- Durable and load-bearing on floors
- Economical for big openings
- Accepts collars and wraps
World Steel · centro de envolvente del edificio
Cómo utilizamos Firestop mortars en edificios de acero
World Steel coordinates firestop systems with the fire-rated walls, floors and steel decks of the building package.
Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.
- 01Especificado junto con la estructura – espesor, densidad y revestimiento adaptados al diseño de cubierta, fachada y protección contra incendios.
- 02Cantidades obtenidas del mismo modelo 3D que el acero, las correas y el cerramiento.
- 03Embalado y enviado con el paquete de acero – un solo programa de entrega a obra.
Aplicaciones
Dónde se utiliza Firestop mortars
- Riser floors and plant room walls
- Cable tray and pipe clusters
- Concrete and masonry walls
Datos técnicos
Firestop mortars – propiedades técnicas
Typical properties and standards
| Propiedad | Unidad | Valor |
|---|---|---|
| Fire test | — | EN 1366-3 · ASTM E814 / UL 1479 · AS 1530.4 |
| Classification | — | EN 13501-2 (EI) · F / T ratings (UL) |
Valores publicados por el fabricante para este mercado. Consulte siempre la ficha técnica vigente y las homologaciones requeridas para su proyecto antes de hacer el pedido.
Firestop systems
Productos relacionados
Firestop · penetration and joint sealsFirestop pillows and bagsVer producto →Firestop · penetration and joint sealsFirestop coatings for cables and battsVer producto →Firestop · penetration and joint sealsFire-rated linear joint sealsVer producto →← Firestop systems by typeFire Stopping and Penetration Seals →
FAQ
Preguntas frecuentes
Can firestop mortar be used in drywall?
Only where the tested system covers the wall type – lightweight walls usually use sealants, boards or pillows.
Is this product certified?
Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.
Un solo socio para estructura y envolvente
Envíenos sus planos o su listado de cantidades – cotizamos juntos el acero, el aislamiento, las placas y los cielorrasos y los enviamos en un solo paquete.