ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
Imágenes de productos: el fabricante (oficiales).
Firestop · penetration and joint seals
Fire-rated linear joint seals
Gaps between walls, floors and façades move – their fire seals must move too.
- Penetrations and joints
- Use
- EI / F-T ratings per test
- Classification
- Tested with the wall or floor
- System
Suministrado por World Steel con su edificio de acero o por separado – un pedido, un envío, un socio.
Resumen
Acerca de Fire-rated linear joint seals
Linear joint seals combine backing (often stone wool) with fire-rated sealants or sprays, sized for joint width and movement.
They are tested to EN 1366-4 (classified under EN 13501-2), UL 2079 / ASTM E1966 for joints and ASTM E2307 for perimeter fire barriers at curtain walls, and AS 1530.4.
Head-of-wall joints under steel decks need systems tested with the deck profile.
Ventajas principales
- Accommodates building movement
- Seals head-of-wall and floor joints
- Perimeter barriers at curtain walls
- Tested for joint width and movement
World Steel · centro de envolvente del edificio
Cómo utilizamos Fire-rated linear joint seals en edificios de acero
World Steel coordinates firestop systems with the fire-rated walls, floors and steel decks of the building package.
Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.
- 01Especificado junto con la estructura – espesor, densidad y revestimiento adaptados al diseño de cubierta, fachada y protección contra incendios.
- 02Cantidades obtenidas del mismo modelo 3D que el acero, las correas y el cerramiento.
- 03Embalado y enviado con el paquete de acero – un solo programa de entrega a obra.
Aplicaciones
Dónde se utiliza Fire-rated linear joint seals
- Head-of-wall joints under steel decks
- Expansion joints in floors and walls
- Curtain-wall slab edges
Datos técnicos
Fire-rated linear joint seals – propiedades técnicas
Typical properties and standards
| Propiedad | Unidad | Valor |
|---|---|---|
| Fire test | — | EN 1366-4 · UL 2079 / ASTM E1966 · ASTM E2307 · AS 1530.4 |
| Movement | % | Per tested system |
Valores publicados por el fabricante para este mercado. Consulte siempre la ficha técnica vigente y las homologaciones requeridas para su proyecto antes de hacer el pedido.
Firestop systems
Productos relacionados
Firestop · penetration and joint sealsFirestop mortarsVer producto →Firestop · penetration and joint sealsFirestop pillows and bagsVer producto →Firestop · penetration and joint sealsFirestop coatings for cables and battsVer producto →← Firestop systems by typeFire Stopping and Penetration Seals →
FAQ
Preguntas frecuentes
Can ordinary sealant fill a fire-rated joint?
No – only sealants and backing tested as a joint system for that width, movement and construction.
Is this product certified?
Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.
Un solo socio para estructura y envolvente
Envíenos sus planos o su listado de cantidades – cotizamos juntos el acero, el aislamiento, las placas y los cielorrasos y los enviamos en un solo paquete.