نبني الثقة ونضمن النجاح بوابة العملاء dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success
Fire-rated linear joint seals – illustration

صور المنتجات: الشركة المصنّعة (رسمية).

Firestop · penetration and joint seals

Fire-rated linear joint seals

Gaps between walls, floors and façades move – their fire seals must move too.

Penetrations and joints
Use
EI / F-T ratings per test
Classification
Tested with the wall or floor
System

اطلب عرض سعر

توردها World Steel مع مبناكم الفولاذي أو بشكل منفصل – طلبية واحدة، شحنة واحدة، شريك واحد.

نظرة عامة

حول Fire-rated linear joint seals

Linear joint seals combine backing (often stone wool) with fire-rated sealants or sprays, sized for joint width and movement.

They are tested to EN 1366-4 (classified under EN 13501-2), UL 2079 / ASTM E1966 for joints and ASTM E2307 for perimeter fire barriers at curtain walls, and AS 1530.4.

Head-of-wall joints under steel decks need systems tested with the deck profile.

المزايا الرئيسية

  • Accommodates building movement
  • Seals head-of-wall and floor joints
  • Perimeter barriers at curtain walls
  • Tested for joint width and movement

World Steel · مركز غلاف المباني

كيف نستخدم Fire-rated linear joint seals في المباني الفولاذية

World Steel coordinates firestop systems with the fire-rated walls, floors and steel decks of the building package.

Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.

  • 01يُحدَّد مع المنشأة – السماكة والكثافة والوجه مطابقة لتصميم السقف والجدران والحماية من الحريق.
  • 02الكميات مأخوذة من النموذج ثلاثي الأبعاد ذاته للفولاذ والمدادات والتكسية.
  • 03يُعبأ ويُشحن مع حزمة الفولاذ – جدول تسليم واحد إلى الموقع.

التطبيقات

أين يُستخدم Fire-rated linear joint seals

  • Head-of-wall joints under steel decks
  • Expansion joints in floors and walls
  • Curtain-wall slab edges

البيانات الفنية

Fire-rated linear joint seals – الخصائص الفنية

Typical properties and standards

الخاصيةالوحدةالقيمة
Fire test—EN 1366-4 · UL 2079 / ASTM E1966 · ASTM E2307 · AS 1530.4
Movement%Per tested system

القيم كما نشرتها الشركة المصنّعة لهذا السوق. تحققوا دائماً من صحيفة البيانات الحالية والاعتمادات المطلوبة لمشروعكم قبل الطلب.

FAQ

الأسئلة المتكررة

Can ordinary sealant fill a fire-rated joint?

No – only sealants and backing tested as a joint system for that width, movement and construction.

Is this product certified?

Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.

شريك واحد للهيكل والغلاف

أرسلوا إلينا مخططاتكم أو جدول الكميات – نسعّر الفولاذ والعزل والألواح والأسقف المعلقة معاً ونشحنها كحزمة واحدة.

اطلب عرض سعر +84 902 881 833