Firestop · penetration and joint seals
Firestop mortars
A strong, permanent seal for large, busy penetrations – poured or trowelled around the services.
- Penetrations and joints
- Use
- EI / F-T ratings per test
- Classification
- Tested with the wall or floor
- System
World Steel が鉄骨建築と一括で、または単体で供給 – 一つの注文、一つの出荷、一つのパートナー。
概要
Firestop mortarsについて
Mortars seal large openings with mixed services and can be loaded on floors; the tested system defines opening size, service types and mortar depth.
Penetration seals are tested to EN 1366-3 (classified under EN 13501-2), ASTM E814 / UL 1479 (F and T ratings) or AS 1530.4.
Plastic pipes usually need collars or wraps in addition to the mortar.
主なメリット
- Seals large mixed penetrations
- Durable and load-bearing on floors
- Economical for big openings
- Accepts collars and wraps
World Steel · 外装材ハブ
鉄骨建築におけるFirestop mortarsの活用
World Steel coordinates firestop systems with the fire-rated walls, floors and steel decks of the building package.
Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.
- 01構造と一体で仕様決定 – 厚さ、密度、表面材を屋根・外壁・耐火設計に合わせます。
- 02数量は鉄骨、母屋、外装材と同じ 3D モデルから算出。
- 03鉄骨パッケージとともに梱包・出荷 – 現場への納入スケジュールは一つです。
用途
Firestop mortarsの用途
- Riser floors and plant room walls
- Cable tray and pipe clusters
- Concrete and masonry walls
技術データ
Firestop mortars – 技術特性
Typical properties and standards
| 特性 | 単位 | 値 |
|---|---|---|
| Fire test | — | EN 1366-3 · ASTM E814 / UL 1479 · AS 1530.4 |
| Classification | — | EN 13501-2 (EI) · F / T ratings (UL) |
この市場向けにメーカーが公表している値です。ご注文前に必ず最新のデータシートと、プロジェクトに必要な認定をご確認ください。
Firestop systems
関連製品
Firestop · penetration and joint sealsFirestop pillows and bags製品を見る →
Firestop · penetration and joint sealsFirestop coatings for cables and batts製品を見る →
Firestop · penetration and joint sealsFire-rated linear joint seals製品を見る →← Firestop systems by typeFire Stopping and Penetration Seals →
FAQ
よくある質問
Can firestop mortar be used in drywall?
Only where the tested system covers the wall type – lightweight walls usually use sealants, boards or pillows.
Is this product certified?
Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.