ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
製品画像：メーカー（公式）。
Firestop · penetration and joint seals
Firestop coatings for cables and batts
Coatings that slow fire spread along cables and turn stone wool batts into tested penetration seals.
- Penetrations and joints
- Use
- EI / F-T ratings per test
- Classification
- Tested with the wall or floor
- System
World Steel が鉄骨建築と一括で、または単体で供給 – 一つの注文、一つの出荷、一つのパートナー。
概要
Firestop coatings for cables and battsについて
Coated batt systems – stone wool slabs coated with an ablative or intumescent coating – seal openings with cables, trays and pipes in walls and floors.
Cable coatings reduce fire spread along cable runs; their performance is tested for the cable types and bundle sizes in the system.
Penetration seals are classified from EN 1366-3, UL 1479 / ASTM E814 or AS 1530.4 tests.
主なメリット
- Lightweight seals for walls and floors
- Easy to retrofit cables
- Reduces fire spread along cables
- Works with stone wool batts
World Steel · 外装材ハブ
鉄骨建築におけるFirestop coatings for cables and battsの活用
World Steel coordinates firestop systems with the fire-rated walls, floors and steel decks of the building package.
Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.
- 01構造と一体で仕様決定 – 厚さ、密度、表面材を屋根・外壁・耐火設計に合わせます。
- 02数量は鉄骨、母屋、外装材と同じ 3D モデルから算出。
- 03鉄骨パッケージとともに梱包・出荷 – 現場への納入スケジュールは一つです。
用途
Firestop coatings for cables and battsの用途
- Cable penetrations in walls and floors
- Long cable runs in plants
- Retrofit openings
技術データ
Firestop coatings for cables and batts – 技術特性
Typical properties and standards
| 特性 | 単位 | 値 |
|---|---|---|
| Fire test | — | EN 1366-3 · ASTM E814 / UL 1479 · AS 1530.4 |
| Cable fire spread | — | Per manufacturer’s tested cable types |
この市場向けにメーカーが公表している値です。ご注文前に必ず最新のデータシートと、プロジェクトに必要な認定をご確認ください。
FAQ
よくある質問
Do coated batts need stone wool of a specific density?
Yes – the tested system defines the batt density, thickness and coating thickness.
Is this product certified?
Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.