ROCKWOOL · Roof insulation
ROCKWOOL Cool 'n' Comfort™ Blanket and Slab
Cool ’n’ Comfort Blanket and Slab is installed below the metal cladding sheet of a single skin roof system, held by reinforced steel wire mesh and aluminium foil. It is available to suit all types of roofs in residential, commercial and industrial buildings.
- 0.034 W/m·K
- λ at 23 °C
- Euroclass A1
- Reaction to fire (EN 13501-1)
- 0.50 kg/m²
- Water absorption
EUCEB
SGBC
SIRIM
UL Classified
Solicitar cotaçãoFicha técnica (PDF) ↗
Fornecido pela World Steel com seu edifício metálico ou separadamente – um pedido, um embarque, um parceiro.
Visão geral
Sobre Cool 'n' Comfort™ Blanket and Slab
Cool ’n’ Comfort Blanket and Slab series is a non-combustible light weight thermal insulation solution for single skin roofing system. It is available in roll form for ease of installation over large areas and manufactured in a variety of thicknesses, with or without foil facing, suitable for thermal insulation in residential, commercial and industrial buildings.
Application: Cool ’n’ Comfort Blanket and Slab Series is the ideal non-combustible light weight thermal insulation solution for single skin roofing system to improve level of thermal and acoustic insulation as well as fire protection.
Principais benefícios
- Provide thermal insulation to improve indoor comfort through solar heat gain reduction
- Dampening the noise and vibration from external sources and rain impact noise
- Fire safe solution (Non-combustible)
- Durable, and lasts for a lifetime of a building (weather resilience)
- Simple and fast installation
- Good recovery and handability
- Reduce water absorption liability risk ( moisture resistant and enhanced water repellent and)
World Steel · central de envoltória da edificação
Como usamos Cool 'n' Comfort™ Blanket and Slab em edifícios metálicos
On World Steel pre-engineered and structural steel buildings, ROCKWOOL Cool 'n' Comfort™ Blanket and Slab is laid under the metal roof sheeting on the purlins, held by wire mesh and foil where specified – cutting solar heat gain and rain noise while keeping the roof non-combustible. We size the thickness with the roof design, take quantities from the same 3D model as the purlins and sheeting, and ship the insulation with the steel package.
- 01Especificado junto com a estrutura – espessura, densidade e revestimento compatíveis com o projeto da cobertura, das paredes e de proteção contra incêndio.
- 02Quantitativos extraídos do mesmo modelo 3D que o aço, as terças e o fechamento.
- 03Embalado e enviado com o pacote de aço – um único cronograma de entrega na obra.
Aplicações
Onde Cool 'n' Comfort™ Blanket and Slab é utilizado
- Roof Insulation › Metal Roof
- External Wall Insulation › Metal Wall Insulation
- Roof Insulation › Pitched Roof
Dados técnicos
Cool 'n' Comfort™ Blanket and Slab – propriedades técnicas
Thermal conductivity
| Propriedade | Unidade | Valor |
|---|---|---|
| Thermal conductivity | λ (23°C) | 0.034 |
Technical properties
| Propriedade | Unidade | Valor |
|---|---|---|
| Reaction to Fire | Euroclass | A1 |
| Water Absorption | kg/m2 | 0.50 |
| Water Vapour Absorption | % | 0.04 |
Valores conforme publicados pelo fabricante para este mercado. Sempre verifique a ficha técnica atual e as aprovações exigidas para seu projeto antes de fazer o pedido. Página do fabricante ↗
Aprovações e selos
Aprovações listadas para Cool 'n' Comfort™ Blanket and Slab
EUCEBFibres certified by EUCEB (European Certification Board for Mineral Wool Products) as meeting the exoneration criteria of EU Regulation 1272/2008, Note Q.
SGBCSingapore Green Building Product certification by the Singapore Green Building Council.
SIRIMProduct certification by SIRIM QAS International, Malaysia.
UL ClassifiedClassified by UL Solutions for the properties shown in the UL listing.Aprovações conforme indicadas pelo fabricante para este produto. Certificados e listagens aplicam-se ao produto e ao sistema ensaiados – solicite as cópias atuais junto com sua cotação.
Documentos
Fichas técnicas e documentos
FAQ
Perguntas frequentes
Is ROCKWOOL Cool 'n' Comfort™ Blanket and Slab suitable for metal roofs of steel buildings?
Yes. It is designed for insulation under metal roof sheeting – World Steel specifies the thickness and facing with the roof design of your building.
Is ROCKWOOL Cool 'n' Comfort™ Blanket and Slab combustible?
No. ROCKWOOL stone wool is non-combustible; the reaction to fire class is stated in the technical data on this page and in the data sheet.
Um único parceiro para estrutura e envoltória
Envie-nos seus desenhos ou planilha de quantitativos – cotamos o aço, o isolamento, as placas e os forros em conjunto e os enviamos como um único pacote.
ROCKWOOL



ROCKWOOL
ROCKWOOL