ROCKWOOL · Roof insulation
ROCKWOOL Cool 'n' Comfort™ Blanket and Slab
Cool ’n’ Comfort Blanket and Slab is installed below the metal cladding sheet of a single skin roof system, held by reinforced steel wire mesh and aluminium foil. It is available to suit all types of roofs in residential, commercial and industrial buildings.
- 0.034 W/m·K
- λ at 23 °C
- Euroclass A1
- Reaction to fire (EN 13501-1)
- 0.50 kg/m²
- Water absorption
EUCEB
SGBC
SIRIM
UL Classified
World Steel が鉄骨建築と一括で、または単体で供給 – 一つの注文、一つの出荷、一つのパートナー。
概要
Cool 'n' Comfort™ Blanket and Slabについて
Cool ’n’ Comfort Blanket and Slab series is a non-combustible light weight thermal insulation solution for single skin roofing system. It is available in roll form for ease of installation over large areas and manufactured in a variety of thicknesses, with or without foil facing, suitable for thermal insulation in residential, commercial and industrial buildings.
Application: Cool ’n’ Comfort Blanket and Slab Series is the ideal non-combustible light weight thermal insulation solution for single skin roofing system to improve level of thermal and acoustic insulation as well as fire protection.
主なメリット
- Provide thermal insulation to improve indoor comfort through solar heat gain reduction
- Dampening the noise and vibration from external sources and rain impact noise
- Fire safe solution (Non-combustible)
- Durable, and lasts for a lifetime of a building (weather resilience)
- Simple and fast installation
- Good recovery and handability
- Reduce water absorption liability risk ( moisture resistant and enhanced water repellent and)
World Steel · 外装材ハブ
鉄骨建築におけるCool 'n' Comfort™ Blanket and Slabの活用
On World Steel pre-engineered and structural steel buildings, ROCKWOOL Cool 'n' Comfort™ Blanket and Slab is laid under the metal roof sheeting on the purlins, held by wire mesh and foil where specified – cutting solar heat gain and rain noise while keeping the roof non-combustible. We size the thickness with the roof design, take quantities from the same 3D model as the purlins and sheeting, and ship the insulation with the steel package.
- 01構造と一体で仕様決定 – 厚さ、密度、表面材を屋根・外壁・耐火設計に合わせます。
- 02数量は鉄骨、母屋、外装材と同じ 3D モデルから算出。
- 03鉄骨パッケージとともに梱包・出荷 – 現場への納入スケジュールは一つです。
用途
Cool 'n' Comfort™ Blanket and Slabの用途
- Roof Insulation › Metal Roof
- External Wall Insulation › Metal Wall Insulation
- Roof Insulation › Pitched Roof
技術データ
Cool 'n' Comfort™ Blanket and Slab – 技術特性
Thermal conductivity
| 特性 | 単位 | 値 |
|---|---|---|
| Thermal conductivity | λ (23°C) | 0.034 |
Technical properties
| 特性 | 単位 | 値 |
|---|---|---|
| Reaction to Fire | Euroclass | A1 |
| Water Absorption | kg/m2 | 0.50 |
| Water Vapour Absorption | % | 0.04 |
この市場向けにメーカーが公表している値です。ご注文前に必ず最新のデータシートと、プロジェクトに必要な認定をご確認ください。 メーカーのページ ↗
認定・ラベル
Cool 'n' Comfort™ Blanket and Slabの取得認定
EUCEBFibres certified by EUCEB (European Certification Board for Mineral Wool Products) as meeting the exoneration criteria of EU Regulation 1272/2008, Note Q.
SGBCSingapore Green Building Product certification by the Singapore Green Building Council.
SIRIMProduct certification by SIRIM QAS International, Malaysia.
UL ClassifiedClassified by UL Solutions for the properties shown in the UL listing.本製品についてメーカーが示している認定です。証明書と登録は試験された製品とシステムに適用されます – 最新の写しは見積時にご請求ください。
FAQ
よくある質問
Is ROCKWOOL Cool 'n' Comfort™ Blanket and Slab suitable for metal roofs of steel buildings?
Yes. It is designed for insulation under metal roof sheeting – World Steel specifies the thickness and facing with the roof design of your building.
Is ROCKWOOL Cool 'n' Comfort™ Blanket and Slab combustible?
No. ROCKWOOL stone wool is non-combustible; the reaction to fire class is stated in the technical data on this page and in the data sheet.
ROCKWOOL



ROCKWOOL
ROCKWOOL