ROCKWOOL · Roof insulation
ROCKWOOL Cool 'n' Comfort™ Blanket and Slab
Cool ’n’ Comfort Blanket and Slab is installed below the metal cladding sheet of a single skin roof system, held by reinforced steel wire mesh and aluminium foil. It is available to suit all types of roofs in residential, commercial and industrial buildings.
- 0.034 W/m·K
- λ at 23 °C
- Euroclass A1
- Reaction to fire (EN 13501-1)
- 0.50 kg/m²
- Water absorption
EUCEB
SGBC
SIRIM
UL Classified
World Steel이 철골 건축물과 함께 또는 단독으로 공급 – 하나의 주문, 하나의 선적, 하나의 파트너.
개요
Cool 'n' Comfort™ Blanket and Slab 소개
Cool ’n’ Comfort Blanket and Slab series is a non-combustible light weight thermal insulation solution for single skin roofing system. It is available in roll form for ease of installation over large areas and manufactured in a variety of thicknesses, with or without foil facing, suitable for thermal insulation in residential, commercial and industrial buildings.
Application: Cool ’n’ Comfort Blanket and Slab Series is the ideal non-combustible light weight thermal insulation solution for single skin roofing system to improve level of thermal and acoustic insulation as well as fire protection.
주요 장점
- Provide thermal insulation to improve indoor comfort through solar heat gain reduction
- Dampening the noise and vibration from external sources and rain impact noise
- Fire safe solution (Non-combustible)
- Durable, and lasts for a lifetime of a building (weather resilience)
- Simple and fast installation
- Good recovery and handability
- Reduce water absorption liability risk ( moisture resistant and enhanced water repellent and)
World Steel · 건물 외피 허브
철골 건축물에서의 Cool 'n' Comfort™ Blanket and Slab 활용 방식
On World Steel pre-engineered and structural steel buildings, ROCKWOOL Cool 'n' Comfort™ Blanket and Slab is laid under the metal roof sheeting on the purlins, held by wire mesh and foil where specified – cutting solar heat gain and rain noise while keeping the roof non-combustible. We size the thickness with the roof design, take quantities from the same 3D model as the purlins and sheeting, and ship the insulation with the steel package.
- 01구조물과 함께 사양 결정 – 두께, 밀도, 면재를 지붕, 벽 및 내화 설계에 맞춥니다.
- 02철골, 퍼린, 외장재와 동일한 3D 모델에서 물량을 산출합니다.
- 03철골 패키지와 함께 포장·선적 – 현장까지 하나의 납품 일정.
용도
Cool 'n' Comfort™ Blanket and Slab의 사용처
- Roof Insulation › Metal Roof
- External Wall Insulation › Metal Wall Insulation
- Roof Insulation › Pitched Roof
기술 데이터
Cool 'n' Comfort™ Blanket and Slab – 기술 특성
Thermal conductivity
| 특성 | 단위 | 값 |
|---|---|---|
| Thermal conductivity | λ (23°C) | 0.034 |
Technical properties
| 특성 | 단위 | 값 |
|---|---|---|
| Reaction to Fire | Euroclass | A1 |
| Water Absorption | kg/m2 | 0.50 |
| Water Vapour Absorption | % | 0.04 |
해당 시장용으로 제조사가 공개한 값입니다. 주문 전 항상 최신 데이터 시트와 프로젝트에 필요한 승인 사항을 확인하세요. 제조사 페이지 ↗
승인 및 라벨
Cool 'n' Comfort™ Blanket and Slab의 등재 승인
EUCEBFibres certified by EUCEB (European Certification Board for Mineral Wool Products) as meeting the exoneration criteria of EU Regulation 1272/2008, Note Q.
SGBCSingapore Green Building Product certification by the Singapore Green Building Council.
SIRIMProduct certification by SIRIM QAS International, Malaysia.
UL ClassifiedClassified by UL Solutions for the properties shown in the UL listing.제조사가 이 제품에 대해 제시한 승인 사항입니다. 인증서 및 등재는 시험된 제품과 시스템에 적용됩니다 – 견적 시 최신 사본을 요청하세요.
FAQ
자주 묻는 질문
Is ROCKWOOL Cool 'n' Comfort™ Blanket and Slab suitable for metal roofs of steel buildings?
Yes. It is designed for insulation under metal roof sheeting – World Steel specifies the thickness and facing with the roof design of your building.
Is ROCKWOOL Cool 'n' Comfort™ Blanket and Slab combustible?
No. ROCKWOOL stone wool is non-combustible; the reaction to fire class is stated in the technical data on this page and in the data sheet.
구조와 외피를 위한 하나의 파트너
도면 또는 물량 내역서를 보내주시면 철골, 단열재, 보드, 천장재를 함께 견적하여 하나의 패키지로 선적합니다.
ROCKWOOL



ROCKWOOL
ROCKWOOL