ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
ROCKWOOL
ROCKWOOL · Roof insulation
ROCKWOOL Cool 'n' Comfort™ Blanket and Slab
Cool ’n’ Comfort Blanket and Slab is installed below the metal cladding sheet of a single skin roof system, held by reinforced steel wire mesh and aluminium foil. It is available to suit all types of roofs in residential, commercial and industrial buildings.
- 0.034 W/m·K
- λ at 23 °C
- Euroclass A1
- Reaction to fire (EN 13501-1)
- 0.50 kg/m²
- Water absorption
EUCEB
SGBC
SIRIM
UL Classified
由 World Steel 随您的钢结构建筑一并供应或单独供应 – 一份订单、一次发运、一个合作伙伴。
概览
关于Cool 'n' Comfort™ Blanket and Slab
Cool ’n’ Comfort Blanket and Slab series is a non-combustible light weight thermal insulation solution for single skin roofing system. It is available in roll form for ease of installation over large areas and manufactured in a variety of thicknesses, with or without foil facing, suitable for thermal insulation in residential, commercial and industrial buildings.
Application: Cool ’n’ Comfort Blanket and Slab Series is the ideal non-combustible light weight thermal insulation solution for single skin roofing system to improve level of thermal and acoustic insulation as well as fire protection.
主要优势
- Provide thermal insulation to improve indoor comfort through solar heat gain reduction
- Dampening the noise and vibration from external sources and rain impact noise
- Fire safe solution (Non-combustible)
- Durable, and lasts for a lifetime of a building (weather resilience)
- Simple and fast installation
- Good recovery and handability
- Reduce water absorption liability risk ( moisture resistant and enhanced water repellent and)
World Steel · 建筑围护材料中心
我们如何在钢结构建筑中使用Cool 'n' Comfort™ Blanket and Slab
On World Steel pre-engineered and structural steel buildings, ROCKWOOL Cool 'n' Comfort™ Blanket and Slab is laid under the metal roof sheeting on the purlins, held by wire mesh and foil where specified – cutting solar heat gain and rain noise while keeping the roof non-combustible. We size the thickness with the roof design, take quantities from the same 3D model as the purlins and sheeting, and ship the insulation with the steel package.
- 01与结构一同选型 – 厚度、密度和饰面与屋面、墙面及防火设计相匹配。
- 02工程量取自与钢构件、檩条和围护板相同的 3D 模型。
- 03与钢结构包一同包装发运 – 一份到场交货计划。
应用
Cool 'n' Comfort™ Blanket and Slab的应用场合
- Roof Insulation › Metal Roof
- External Wall Insulation › Metal Wall Insulation
- Roof Insulation › Pitched Roof
技术数据
Cool 'n' Comfort™ Blanket and Slab – 技术性能
Thermal conductivity
| 性能 | 单位 | 数值 |
|---|---|---|
| Thermal conductivity | λ (23°C) | 0.034 |
Technical properties
| 性能 | 单位 | 数值 |
|---|---|---|
| Reaction to Fire | Euroclass | A1 |
| Water Absorption | kg/m2 | 0.50 |
| Water Vapour Absorption | % | 0.04 |
数值为制造商针对该市场公布的数据。订货前请务必核对最新数据表及项目所需的认证。 制造商页面 ↗
认证与标签
Cool 'n' Comfort™ Blanket and Slab的已列认证
EUCEBFibres certified by EUCEB (European Certification Board for Mineral Wool Products) as meeting the exoneration criteria of EU Regulation 1272/2008, Note Q.SGBCSingapore Green Building Product certification by the Singapore Green Building Council.SIRIMProduct certification by SIRIM QAS International, Malaysia.UL ClassifiedClassified by UL Solutions for the properties shown in the UL listing.认证信息以制造商对该产品的公布为准。证书及列名适用于经测试的产品和系统 – 请在询价时索取最新副本。
ROCKWOOL
ROCKWOOLFAQ
常见问题
Is ROCKWOOL Cool 'n' Comfort™ Blanket and Slab suitable for metal roofs of steel buildings?
Yes. It is designed for insulation under metal roof sheeting – World Steel specifies the thickness and facing with the roof design of your building.
Is ROCKWOOL Cool 'n' Comfort™ Blanket and Slab combustible?
No. ROCKWOOL stone wool is non-combustible; the reaction to fire class is stated in the technical data on this page and in the data sheet.