ROCKWOOL Cool 'n' Comfort™ Blanket and Slab – official product image

ROCKWOOL Cool 'n' Comfort™ Blanket and Slab

Product images: ROCKWOOL (official).

ROCKWOOL · Roof insulation

ROCKWOOL Cool 'n' Comfort™ Blanket and Slab

Cool ’n’ Comfort Blanket and Slab is installed below the metal cladding sheet of a single skin roof system, held by reinforced steel wire mesh and aluminium foil. It is available to suit all types of roofs in residential, commercial and industrial buildings.

0.034 W/m·K
λ at 23 °C: Euroclass A1
Reaction to fire (EN 13501-1): 0.50 kg/m²
Water absorption

EUCEB
SGBC
SIRIM
UL Classified

Request a quotation Data sheet (PDF) ↗

Supplied by World Steel with your steel building or on its own – one order, one shipment, one partner.

Overview

About Cool 'n' Comfort™ Blanket and Slab

Cool ’n’ Comfort Blanket and Slab series is a non-combustible light weight thermal insulation solution for single skin roofing system. It is available in roll form for ease of installation over large areas and manufactured in a variety of thicknesses, with or without foil facing, suitable for thermal insulation in residential, commercial and industrial buildings.

Application: Cool ’n’ Comfort Blanket and Slab Series is the ideal non-combustible light weight thermal insulation solution for single skin roofing system to improve level of thermal and acoustic insulation as well as fire protection.

Key benefits

Provide thermal insulation to improve indoor comfort through solar heat gain reduction
Dampening the noise and vibration from external sources and rain impact noise
Fire safe solution (Non-combustible)
Durable, and lasts for a lifetime of a building (weather resilience)
Simple and fast installation
Good recovery and handability
Reduce water absorption liability risk ( moisture resistant and enhanced water repellent and)

World Steel · building envelope hub

How we use Cool 'n' Comfort™ Blanket and Slab in steel buildings

On World Steel pre-engineered and structural steel buildings, ROCKWOOL Cool 'n' Comfort™ Blanket and Slab is laid under the metal roof sheeting on the purlins, held by wire mesh and foil where specified – cutting solar heat gain and rain noise while keeping the roof non-combustible. We size the thickness with the roof design, take quantities from the same 3D model as the purlins and sheeting, and ship the insulation with the steel package.

01Specified with the structure – thickness, density and facing matched to the roof, wall and fire design.
02Quantities taken from the same 3D model as the steel, purlins and cladding.
03Packed and shipped with the steel package – one delivery schedule to site.

Applications

Where Cool 'n' Comfort™ Blanket and Slab is used

Roof Insulation › Metal Roof
External Wall Insulation › Metal Wall Insulation
Roof Insulation › Pitched Roof

Technical data

Cool 'n' Comfort™ Blanket and Slab – technical properties

Thermal conductivity

Property	Unit	Value
Thermal conductivity	λ (23°C)	0.034

Technical properties

Property	Unit	Value
Reaction to Fire	Euroclass	A1
Water Absorption	kg/m2	0.50
Water Vapour Absorption	%	0.04

Values as published by the manufacturer for this market. Always check the current data sheet and the approvals required for your project before ordering. Manufacturer page ↗

Approvals & labels

Listed approvals for Cool 'n' Comfort™ Blanket and Slab

EUCEBFibres certified by EUCEB (European Certification Board for Mineral Wool Products) as meeting the exoneration criteria of EU Regulation 1272/2008, Note Q.

SGBCSingapore Green Building Product certification by the Singapore Green Building Council.

SIRIMProduct certification by SIRIM QAS International, Malaysia.

UL ClassifiedClassified by UL Solutions for the properties shown in the UL listing.

Approvals as shown by the manufacturer for this product. Certificates and listings apply to the tested product and system – request the current copies with your quotation.

Documents