ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
Imágenes de productos: el fabricante (oficiales).
High-temperature insulation
Ceramic and high-temperature fibre insulation
Insulation for heat far beyond building fires – furnaces, hot ducts and equipment in industrial plants.
- Process heat, equipment
- Use
- Blanket, board, paper, module
- Forms
- By classification temperature
- Grades
Suministrado por World Steel con su edificio de acero o por separado – un pedido, un envío, un socio.
Resumen
Acerca de Ceramic and high-temperature fibre insulation
Ceramic (refractory) fibre and low-biopersistence alkaline-earth silicate (AES) fibres insulate at process temperatures well above building fire curves; grades are selected by classification temperature.
Refractory ceramic fibre is classified as a carcinogen (category 1B) under the EU CLP regulation, so AES or other low-biopersistence fibres are preferred where they meet the temperature.
These products protect equipment and processes – they are not a substitute for a tested fire-resistance system for structural steel.
Ventajas principales
- Very high service temperatures
- Low heat storage, fast heat-up
- Flexible forms for complex shapes
- Low-biopersistence options
World Steel · centro de envolvente del edificio
Cómo utilizamos Ceramic and high-temperature fibre insulation en edificios de acero
World Steel supplies high-temperature insulation with plant and equipment structures and coordinates supports and cladding.
Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.
- 01Especificado junto con la estructura – espesor, densidad y revestimiento adaptados al diseño de cubierta, fachada y protección contra incendios.
- 02Cantidades obtenidas del mismo modelo 3D que el acero, las correas y el cerramiento.
- 03Embalado y enviado con el paquete de acero – un solo programa de entrega a obra.
Aplicaciones
Dónde se utiliza Ceramic and high-temperature fibre insulation
- Furnace and kiln linings
- Hot ducts and flues
- Equipment and expansion-joint insulation
Datos técnicos
Ceramic and high-temperature fibre insulation – propiedades técnicas
Typical properties and standards
| Propiedad | Unidad | Valor |
|---|---|---|
| Classification temperature | °C | By grade – selected for the process temperature |
| Fibre types | — | Refractory ceramic fibre (RCF), AES / low-biopersistence fibres |
| Health | — | RCF: EU CLP carcinogen cat. 1B – handling controls; AES preferred where suitable |
| Standards | — | EN 1094-7 (test methods for blankets) · ASTM C892 (blankets) |
Valores publicados por el fabricante para este mercado. Consulte siempre la ficha técnica vigente y las homologaciones requeridas para su proyecto antes de hacer el pedido.
High-temperature insulation
Productos relacionados
← High-temperature and fire insulationOther Insulation Materials – PU/PIR, EPS, XPS, PE Foam →
FAQ
Preguntas frecuentes
Can ceramic fibre protect structural steel in a building fire?
Only as part of a tested fire-resistance system. For structural steel use intumescents, boards or sprays with test evidence.
Is this product certified?
Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.
Un solo socio para estructura y envolvente
Envíenos sus planos o su listado de cantidades – cotizamos juntos el acero, el aislamiento, las placas y los cielorrasos y los enviamos en un solo paquete.