ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
Images des produits : le fabricant (officielles).
High-temperature insulation
Ceramic and high-temperature fibre insulation
Insulation for heat far beyond building fires – furnaces, hot ducts and equipment in industrial plants.
- Process heat, equipment
- Use
- Blanket, board, paper, module
- Forms
- By classification temperature
- Grades
Fourni par World Steel avec votre bâtiment en acier ou séparément – une commande, une expédition, un partenaire.
Aperçu
À propos : Ceramic and high-temperature fibre insulation
Ceramic (refractory) fibre and low-biopersistence alkaline-earth silicate (AES) fibres insulate at process temperatures well above building fire curves; grades are selected by classification temperature.
Refractory ceramic fibre is classified as a carcinogen (category 1B) under the EU CLP regulation, so AES or other low-biopersistence fibres are preferred where they meet the temperature.
These products protect equipment and processes – they are not a substitute for a tested fire-resistance system for structural steel.
Principaux avantages
- Very high service temperatures
- Low heat storage, fast heat-up
- Flexible forms for complex shapes
- Low-biopersistence options
World Steel · plateforme enveloppe du bâtiment
Comment nous utilisons Ceramic and high-temperature fibre insulation dans les bâtiments en acier
World Steel supplies high-temperature insulation with plant and equipment structures and coordinates supports and cladding.
Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.
- 01Prescrit avec la structure – épaisseur, densité et parement adaptés à la conception de la toiture, des façades et de la sécurité incendie.
- 02Quantités issues de la même maquette 3D que l'acier, les pannes et le bardage.
- 03Emballé et expédié avec le lot acier – un seul planning de livraison sur chantier.
Applications
Où Ceramic and high-temperature fibre insulation est utilisé
- Furnace and kiln linings
- Hot ducts and flues
- Equipment and expansion-joint insulation
Données techniques
Ceramic and high-temperature fibre insulation – caractéristiques techniques
Typical properties and standards
| Caractéristique | Unité | Valeur |
|---|---|---|
| Classification temperature | °C | By grade – selected for the process temperature |
| Fibre types | — | Refractory ceramic fibre (RCF), AES / low-biopersistence fibres |
| Health | — | RCF: EU CLP carcinogen cat. 1B – handling controls; AES preferred where suitable |
| Standards | — | EN 1094-7 (test methods for blankets) · ASTM C892 (blankets) |
Valeurs publiées par le fabricant pour ce marché. Vérifiez toujours la fiche technique en vigueur et les agréments requis pour votre projet avant de commander.
FAQ
Questions fréquentes
Can ceramic fibre protect structural steel in a building fire?
Only as part of a tested fire-resistance system. For structural steel use intumescents, boards or sprays with test evidence.
Is this product certified?
Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.
Un seul partenaire pour la structure et l'enveloppe
Envoyez-nous vos plans ou votre bordereau des quantités – nous chiffrons ensemble l'acier, l'isolation, les plaques et les plafonds et les expédions en un seul lot.