ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
Imagens dos produtos: o fabricante (oficiais).
High-temperature insulation
Ceramic and high-temperature fibre insulation
Insulation for heat far beyond building fires – furnaces, hot ducts and equipment in industrial plants.
- Process heat, equipment
- Use
- Blanket, board, paper, module
- Forms
- By classification temperature
- Grades
Fornecido pela World Steel com seu edifício metálico ou separadamente – um pedido, um embarque, um parceiro.
Visão geral
Sobre Ceramic and high-temperature fibre insulation
Ceramic (refractory) fibre and low-biopersistence alkaline-earth silicate (AES) fibres insulate at process temperatures well above building fire curves; grades are selected by classification temperature.
Refractory ceramic fibre is classified as a carcinogen (category 1B) under the EU CLP regulation, so AES or other low-biopersistence fibres are preferred where they meet the temperature.
These products protect equipment and processes – they are not a substitute for a tested fire-resistance system for structural steel.
Principais benefícios
- Very high service temperatures
- Low heat storage, fast heat-up
- Flexible forms for complex shapes
- Low-biopersistence options
World Steel · central de envoltória da edificação
Como usamos Ceramic and high-temperature fibre insulation em edifícios metálicos
World Steel supplies high-temperature insulation with plant and equipment structures and coordinates supports and cladding.
Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.
- 01Especificado junto com a estrutura – espessura, densidade e revestimento compatíveis com o projeto da cobertura, das paredes e de proteção contra incêndio.
- 02Quantitativos extraídos do mesmo modelo 3D que o aço, as terças e o fechamento.
- 03Embalado e enviado com o pacote de aço – um único cronograma de entrega na obra.
Aplicações
Onde Ceramic and high-temperature fibre insulation é utilizado
- Furnace and kiln linings
- Hot ducts and flues
- Equipment and expansion-joint insulation
Dados técnicos
Ceramic and high-temperature fibre insulation – propriedades técnicas
Typical properties and standards
| Propriedade | Unidade | Valor |
|---|---|---|
| Classification temperature | °C | By grade – selected for the process temperature |
| Fibre types | — | Refractory ceramic fibre (RCF), AES / low-biopersistence fibres |
| Health | — | RCF: EU CLP carcinogen cat. 1B – handling controls; AES preferred where suitable |
| Standards | — | EN 1094-7 (test methods for blankets) · ASTM C892 (blankets) |
Valores conforme publicados pelo fabricante para este mercado. Sempre verifique a ficha técnica atual e as aprovações exigidas para seu projeto antes de fazer o pedido.
High-temperature insulation
Produtos relacionados
← High-temperature and fire insulationOther Insulation Materials – PU/PIR, EPS, XPS, PE Foam →
FAQ
Perguntas frequentes
Can ceramic fibre protect structural steel in a building fire?
Only as part of a tested fire-resistance system. For structural steel use intumescents, boards or sprays with test evidence.
Is this product certified?
Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.
Um único parceiro para estrutura e envoltória
Envie-nos seus desenhos ou planilha de quantitativos – cotamos o aço, o isolamento, as placas e os forros em conjunto e os enviamos como um único pacote.