ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
製品画像：メーカー（公式）。
High-temperature insulation
Ceramic and high-temperature fibre insulation
Insulation for heat far beyond building fires – furnaces, hot ducts and equipment in industrial plants.
- Process heat, equipment
- Use
- Blanket, board, paper, module
- Forms
- By classification temperature
- Grades
World Steel が鉄骨建築と一括で、または単体で供給 – 一つの注文、一つの出荷、一つのパートナー。
概要
Ceramic and high-temperature fibre insulationについて
Ceramic (refractory) fibre and low-biopersistence alkaline-earth silicate (AES) fibres insulate at process temperatures well above building fire curves; grades are selected by classification temperature.
Refractory ceramic fibre is classified as a carcinogen (category 1B) under the EU CLP regulation, so AES or other low-biopersistence fibres are preferred where they meet the temperature.
These products protect equipment and processes – they are not a substitute for a tested fire-resistance system for structural steel.
主なメリット
- Very high service temperatures
- Low heat storage, fast heat-up
- Flexible forms for complex shapes
- Low-biopersistence options
World Steel · 外装材ハブ
鉄骨建築におけるCeramic and high-temperature fibre insulationの活用
World Steel supplies high-temperature insulation with plant and equipment structures and coordinates supports and cladding.
Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.
- 01構造と一体で仕様決定 – 厚さ、密度、表面材を屋根・外壁・耐火設計に合わせます。
- 02数量は鉄骨、母屋、外装材と同じ 3D モデルから算出。
- 03鉄骨パッケージとともに梱包・出荷 – 現場への納入スケジュールは一つです。
用途
Ceramic and high-temperature fibre insulationの用途
- Furnace and kiln linings
- Hot ducts and flues
- Equipment and expansion-joint insulation
技術データ
Ceramic and high-temperature fibre insulation – 技術特性
Typical properties and standards
| 特性 | 単位 | 値 |
|---|---|---|
| Classification temperature | °C | By grade – selected for the process temperature |
| Fibre types | — | Refractory ceramic fibre (RCF), AES / low-biopersistence fibres |
| Health | — | RCF: EU CLP carcinogen cat. 1B – handling controls; AES preferred where suitable |
| Standards | — | EN 1094-7 (test methods for blankets) · ASTM C892 (blankets) |
この市場向けにメーカーが公表している値です。ご注文前に必ず最新のデータシートと、プロジェクトに必要な認定をご確認ください。
FAQ
よくある質問
Can ceramic fibre protect structural steel in a building fire?
Only as part of a tested fire-resistance system. For structural steel use intumescents, boards or sprays with test evidence.
Is this product certified?
Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.