Construindo confiança, garantindo o sucesso Portal do cliente dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success

Anchor bolts & chemical anchors

Anchor rods & internally threaded sleeves for chemical anchors

Threaded anchor rods with chisel end in 5.8, 8.8 and A4 stainless, and internally threaded sleeves – matched to the approved chemical mortar.

Europa

Solicitar cotação Especificações

  • Rods M8 – M30, 5.8 / 8.8 / A4-70 / HCR
  • 45° chisel end, depth mark
  • Nut and washer included
  • Internally threaded sleeves for removable bolts
  • Same steel as in the approval
  • Galvanized or stainless

Match the approval

The capacity in an ETA or ESR applies to the mortar with the rod tested with it. World Steel supplies rods in the grade and finish named in the approval, cut to length with a chisel point and an embedment mark.

Range

Rods and sleeves
ItemGradeUse
Anchor rod5.8 / 8.8 zinc or HDGGeneral structural
Anchor rodA4-70 / A4-80Coastal, wet, chemical
Anchor rodHigh-corrosion-resistant (HCR)Swimming pools, tunnels
Internally threaded sleeve5.8 / A4Removable fixings, flush finish

Normas e requisitos por mercado

Normas segundo as quais a World Steel projeta, fabrica e documenta este produto – e os principais requisitos geométricos e de carga em cada mercado.

Europa

  • EN 1992-4Design of fastenings for use in concrete
  • EAD 330499Bonded fasteners for concrete (ETA)
  • EAD 330087Post-installed rebar connections with mortar
  • EOTA TR 049Seismic performance C1 / C2
Approval
European Technical Assessment (ETA) for the mortar + rod
Todas as normas Europe →

Resumo apenas para orientação – prevalecem a especificação do projeto, a edição da norma adotada e a autoridade competente.

Acabamentos

AcabamentoNormas / observações
ZincISO 4042
HDGISO 10684
StainlessISO 3506

Próximo projeto

Planejando uma estrutura metálica no exterior?

Envie seus desenhos ou modelo IFC – nossa equipe de orçamentos responde com o escopo de fabricação, o cronograma e o preço entregue.