ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
- Rods M8 – M30, 5.8 / 8.8 / A4-70 / HCR
- 45° chisel end, depth mark
- Nut and washer included
- Internally threaded sleeves for removable bolts
- Same steel as in the approval
- Galvanized or stainless
Match the approval
The capacity in an ETA or ESR applies to the mortar with the rod tested with it. World Steel supplies rods in the grade and finish named in the approval, cut to length with a chisel point and an embedment mark.
Range
| Item | Grade | Use |
|---|---|---|
| Anchor rod | 5.8 / 8.8 zinc or HDG | General structural |
| Anchor rod | A4-70 / A4-80 | Coastal, wet, chemical |
| Anchor rod | High-corrosion-resistant (HCR) | Swimming pools, tunnels |
| Internally threaded sleeve | 5.8 / A4 | Removable fixings, flush finish |
各市场标准与要求
World Steel 设计、加工本产品及编制文件所依据的规范——以及各市场的主要几何与荷载要求。
欧洲
- EN 1992-4Design of fastenings for use in concrete
- EAD 330499Bonded fasteners for concrete (ETA)
- EAD 330087Post-installed rebar connections with mortar
- EOTA TR 049Seismic performance C1 / C2
- Approval
- European Technical Assessment (ETA) for the mortar + rod
摘要仅供参考——以项目技术规格书、所采用的规范版本及主管机构要求为准。
表面处理
| 表面处理 | 标准 / 备注 |
|---|---|
| Zinc | ISO 4042 |
| HDG | ISO 10684 |
| Stainless | ISO 3506 |
