ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
- Rods M8 – M30, 5.8 / 8.8 / A4-70 / HCR
- 45° chisel end, depth mark
- Nut and washer included
- Internally threaded sleeves for removable bolts
- Same steel as in the approval
- Galvanized or stainless
Match the approval
The capacity in an ETA or ESR applies to the mortar with the rod tested with it. World Steel supplies rods in the grade and finish named in the approval, cut to length with a chisel point and an embedment mark.
Range
| Item | Grade | Use |
|---|---|---|
| Anchor rod | 5.8 / 8.8 zinc or HDG | General structural |
| Anchor rod | A4-70 / A4-80 | Coastal, wet, chemical |
| Anchor rod | High-corrosion-resistant (HCR) | Swimming pools, tunnels |
| Internally threaded sleeve | 5.8 / A4 | Removable fixings, flush finish |
시장별 표준 및 요구사항
World Steel이 본 제품의 설계, 제작, 문서화에 적용하는 기준 – 그리고 각 시장의 주요 형상 및 하중 요구사항.
유럽
- EN 1992-4Design of fastenings for use in concrete
- EAD 330499Bonded fasteners for concrete (ETA)
- EAD 330087Post-installed rebar connections with mortar
- EOTA TR 049Seismic performance C1 / C2
- Approval
- European Technical Assessment (ETA) for the mortar + rod
참고용 요약입니다 – 프로젝트 시방서, 채택된 기준 판본 및 관할 기관의 요구가 우선합니다.
표면 처리
| 표면 처리 | 표준 / 비고 |
|---|---|
| Zinc | ISO 4042 |
| HDG | ISO 10684 |
| Stainless | ISO 3506 |
