SFRM · concealed steel
Low-density cementitious spray
A light cementitious spray for steel hidden above ceilings and inside walls – fast to apply over large areas, ratings up to about four hours.
- Low
- Density class
- up to ≈ 4 h
- Typical rating
- Interior, concealed
- Exposure
מסופק על ידי World Steel יחד עם מבנה הפלדה שלכם או בנפרד – הזמנה אחת, משלוח אחד, שותף אחד.
סקירה
אודות Low-density cementitious spray
Sprayed directly onto clean, primed or bare steel as specified, in one or more passes.
Thickness set by the member, rating and listed design – measured to ASTM E605.
Covered by ceilings or linings – not for exposed, wet or high-traffic areas.
יתרונות עיקריים
- Lowest cost per m² for long ratings
- Fast application over large areas
- Covers complex shapes and connections
- Also protects metal decks
World Steel · מרכז מעטפת הבניין
כיצד אנו משתמשים ב-Low-density cementitious spray במבני פלדה
World Steel coordinates sprayed fire protection with the steel: compatible primers, clean surfaces and member-by-member thickness schedules from the fire design.
- 01מוגדר במפרט יחד עם המבנה – עובי, צפיפות וציפוי פנים מותאמים לתכנון הגג, הקירות וההגנה מאש.
- 02הכמויות נלקחות מאותו מודל תלת-ממדי של הפלדה, המרישים והחיפוי.
- 03נארז ונשלח עם חבילת הפלדה – לוח אספקה אחד לאתר.
יישומים
היכן משתמשים ב-Low-density cementitious spray
- Concealed beams and columns in offices and hotels
- Steel and metal decks above ceilings
- High-rise steel frames
נתונים טכניים
Low-density cementitious spray – תכונות טכניות
Typical properties
| תכונה | יחידה | ערך |
|---|---|---|
| Density | kg/m³ | low – typically ≈ 240 – 350 |
| Typical rating range | h | 1 – 4 |
| Test standards | — | ASTM E605 (thickness, density) · ASTM E736 (cohesion / adhesion) · UL 263 · EN 13381-4 |
הערכים כפי שפורסמו על ידי היצרן לשוק זה. יש תמיד לבדוק את גיליון הנתונים העדכני ואת האישורים הנדרשים לפרויקט שלכם לפני ההזמנה.
Sprayed fire-resistive materials
מוצרים קשורים
SFRM · gypsum-basedGypsum-based sprayed fireproofingצפייה במוצר →
SFRM · exposed and industrialMedium- and high-density cementitious sprayצפייה במוצר →
SFRM · medium densityMedium-density cementitious sprayצפייה במוצר →
SFRM · lightweightVermiculite / perlite sprayצפייה במוצר →← Cementitious and mineral spraysSprayed Fire-Resistive Materials (SFRM) →
FAQ
שאלות נפוצות
What thickness of low-density cementitious spray do I need?
It depends on the member size (section factor), the critical temperature and the required fire rating – the fire engineer or the manufacturer's tested data gives a thickness for each member.
Does World Steel supply branded products?
Yes – we supply the brand and listed system your specification or authority requires. This page describes the product type.
שותף אחד למבנה ולמעטפת
שלחו לנו את השרטוטים או את כתב הכמויות – נתמחר יחד את הפלדה, הבידוד, הלוחות והתקרות ונשלח אותם כחבילה אחת.