WS overhead cranes, gantries & hoists

WS semi-gantry crane

WS semi-gantry cranes run on a ground rail on one side and a runway beam on the building or wall on the other – ideal along building walls and loading bays.

미국 호주 / 뉴질랜드 유럽

견적 요청 사양

Semi-gantry crane along a factory building

Leg and end carriage detail.

One leg on a ground rail, one end on a runway
Uses the building column line
Single or double girder
Indoor or outdoor

What it is

A semi-gantry combines a gantry leg on one side with an overhead runway on the other – usually the column line of a building. It serves a strip along the wall inside or outside the building without a second runway, a common solution for loading areas and lean-to bays.

Duty group

Vietnam: cranes are designed, manufactured and inspected to TCVN 4244:2005 and the lifting-equipment safety regulation QCVN 07:2012/BLĐTBXH, with technical inspection before use.

시장별 표준 및 요구사항

World Steel이 본 제품의 설계, 제작, 문서화에 적용하는 기준 – 그리고 각 시장의 주요 형상 및 하중 요구사항.

미국

CMAA 70 / CMAA 74Top-running and single girder crane specifications
ASME B30.2 · B30.17Overhead and gantry cranes – safety
ASME B30.16 · ASME HST-4Overhead hoists
OSHA 1910.179Overhead and gantry cranes

Load test: 125 % of rated load (ASME B30.2)

United States 표준 전체 →

호주 / 뉴질랜드

AS 1418.1Cranes – general requirements
AS 1418.18Crane runways and monorails
AS 2550.1Cranes – safe use
AS 4100 · AS/NZS 1554.1Steel design and welding

Registration: Design and item registration per state WHS rules

Australia & New Zealand 표준 전체 →

유럽

EN 15011Bridge and gantry cranes
EN 14492-2Power-driven hoists
EN 13001 seriesCrane design – general, actions, limit states
Machinery DirectiveCE marking of the complete crane

Load test: Static 125 % and dynamic 110 % per EN 15011 / EN 14492-2

Europe 표준 전체 →

참고용 요약입니다 – 프로젝트 시방서, 채택된 기준 판본 및 관할 기관의 요구가 우선합니다.

표면 처리

표면 처리	표준 / 비고
Paint	Blast cleaned, epoxy primer + polyurethane topcoat in safety yellow or project colour
Marking	Rated capacity and safety slogans on the girder in the client's language
Environment	Tropical, cold, high-temperature or chemical execution for hoists