Xây dựng niềm tin, Bảo đảm thành công Cổng khách hàng dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success

Tấm lấy sáng & chiếu sáng tự nhiên

Palram

Israeli manufacturer of polycarbonate and PVC sheets and panel systems for roofing, cladding and daylighting, established in 1963.

Palram Industries was established in 1963 at Kibbutz Ramat Yohanan in Israel. It manufactures polycarbonate and PVC sheets and panel systems for roofing, cladding and glazing and has branches on six continents. Its product lines include SUNLITE multiwall polycarbonate, SUNTUF corrugated polycarbonate and PALRUF corrugated PVC.

In pre-engineered steel buildings, profiled polycarbonate sheets matching the trapezoidal or corrugated roof and wall profiles are used as skylights and wall lights, lapped into the metal cladding and fixed to the purlins and girts. Multiwall polycarbonate is used for skylight strips, canopies and vertical glazing where better thermal insulation is needed. Polycarbonate has high impact resistance, and products with UV-protected surfaces are needed for long-term outdoor exposure. Designers check light transmission, solar heat gain, thermal expansion (which requires oversized holes and suitable washers), span between supports and fire classification. Translucent panels should not be walked on, and fall protection must be provided during installation and maintenance.

Sản phẩm dùng cho PEB và kết cấu thép

  • SUNTUF corrugated polycarbonate – translucent roof and wall sheets matching metal profiles
  • SUNLITE multiwall polycarbonate – skylights, canopies and vertical glazing
  • PALRUF corrugated PVC – roofing in chemically aggressive environments

Tại Việt Nam

Palram products are supplied to Vietnam through importers and distributors; no Palram production site in Vietnam has been verified.

Tên thương hiệu và nhãn hiệu thuộc về chủ sở hữu tương ứng. Việc liệt kê một thương hiệu không có nghĩa là World Steel có quan hệ đối tác hay xác nhận thương hiệu đó; vật liệu được lựa chọn cho từng dự án theo chỉ dẫn kỹ thuật và hồ sơ trình duyệt đã được phê duyệt.

Dự án tiếp theo

Bạn đang lên kế hoạch cho công trình kết cấu thép ở nước ngoài?

Gửi cho chúng tôi bản vẽ hoặc mô hình IFC – bộ phận dự toán sẽ phản hồi phạm vi gia công, tiến độ và giá giao hàng.