Why are anchor rods painted at the end?

So inspectors can verify the grade after the rods are cast in – blue for Grade 36, yellow for 55, red for 105.

Can anchor rods be welded?

Grade 36 yes; Grade 55 only with supplement S1; Grade 105 should not be welded.

Anchor rods ASTM F1554 – Grade 36, 55 & 105

What it is

ASTM F1554 is the US specification for anchor rods that hold column base plates to concrete foundations. The grade number is the minimum yield strength in ksi; the end of each rod is painted so the grade can be checked after the concrete is poured.

Cast-in anchor bolt types — Projection, embedment and the F1554 colour code.

Grades

ASTM F1554 grades
Grade	Yield (min.)	Tensile	Colour	Weldable
36	36 ksi (248 MPa)	58 – 80 ksi	Blue	Yes (S1 for 55)
55	55 ksi (380 MPa)	75 – 95 ksi	Yellow	With supplement S1
105	105 ksi (724 MPa)	125 – 150 ksi	Red	No

Shapes and parts

L-bend (hooked) and J-hook rods for light to moderate tension
Headed rods – forged head or heavy hex nut tack-welded with a plate washer – for high tension
Straight threaded rods with nuts and an embedded plate
Plate washers sized for oversize base plate holes (AISC Design Guide 1)
Levelling nuts, templates and sleeves – see anchor bolt assemblies

The anchor design – embedment, edge distance, concrete breakout and pull-out – follows ACI 318 Chapter 17 and AISC Design Guide 1.

Tiêu chuẩn và yêu cầu theo thị trường

Các quy chuẩn mà World Steel áp dụng để thiết kế, gia công và lập hồ sơ cho sản phẩm này – cùng các yêu cầu chính về hình học và tải trọng tại từng thị trường.