ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
Imágenes de productos: el fabricante (oficiales).
Fire shutters · openings
Fire-rated roller shutters
Large openings stay open for traffic and close automatically when the fire alarm or a fusible link triggers.
- Steel slats
- Curtain
- Openings in fire walls
- Use
- Per tested shutter
- Rating
Suministrado por World Steel con su edificio de acero o por separado – un pedido, un envío, un socio.
Resumen
Acerca de Fire-rated roller shutters
Fire shutters are tested to EN 1634-1 and classified under EN 13501-2 (usually E or EW; EI needs insulated curtains), to UL 10B / NFPA 80 in North America and to AS 1530.4 with AS 1905.2 in Australia.
Release is by fire-alarm signal, fusible link or both, with gravity or motorised fail-safe closing; the opening must be kept clear of obstructions.
The shutter, guides and head box are fixed to the steel framing of the opening, which must itself be fire-protected for the rating.
Ventajas principales
- Closes large openings automatically
- Fail-safe release on alarm or fusible link
- Steel slats, guides and coil box
- Tested with the wall type
World Steel · centro de envolvente del edificio
Cómo utilizamos Fire-rated roller shutters en edificios de acero
World Steel designs the steel framing around shutter openings and protects it for the same fire rating.
Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.
- 01Especificado junto con la estructura – espesor, densidad y revestimiento adaptados al diseño de cubierta, fachada y protección contra incendios.
- 02Cantidades obtenidas del mismo modelo 3D que el acero, las correas y el cerramiento.
- 03Embalado y enviado con el paquete de acero – un solo programa de entrega a obra.
Aplicaciones
Dónde se utiliza Fire-rated roller shutters
- Conveyor and loading openings in fire walls
- Counters and service hatches
- Warehouse compartment openings
Datos técnicos
Fire-rated roller shutters – propiedades técnicas
Typical properties and standards
| Propiedad | Unidad | Valor |
|---|---|---|
| Fire test | — | EN 1634-1 · UL 10B / NFPA 80 · AS 1530.4 |
| Product standard | — | EN 13241 (industrial doors) · AS 1905.2 (fire-resistant shutters) |
| Classification | — | EN 13501-2 – E, EW, EI |
| Release | — | Fire alarm interface and / or fusible link, fail-safe closing |
Valores publicados por el fabricante para este mercado. Consulte siempre la ficha técnica vigente y las homologaciones requeridas para su proyecto antes de hacer el pedido.
Shutters & curtains
Productos relacionados
Fire curtains · active barriersAutomatic fire curtainsVer producto →
Smoke curtains · smoke controlSmoke curtainsVer producto →
Fire curtains · combinedCombined fire and smoke curtainsVer producto →← Fire shutters, fire curtains and smoke curtainsFire-Rated Building Systems – Panels, Doors, Glazing, Shutters and Curtains →
FAQ
Preguntas frecuentes
Does a fire shutter stop heat?
Most shutters are integrity-rated (E or EW); insulated (EI) shutters exist but are thicker – the code decides which class is needed.
Is this product certified?
Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.
Un solo socio para estructura y envolvente
Envíenos sus planos o su listado de cantidades – cotizamos juntos el acero, el aislamiento, las placas y los cielorrasos y los enviamos en un solo paquete.