نبني الثقة ونضمن النجاح بوابة العملاء dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success
Fire-rated roller shutters – illustration

صور المنتجات: الشركة المصنّعة (رسمية).

Fire shutters · openings

Fire-rated roller shutters

Large openings stay open for traffic and close automatically when the fire alarm or a fusible link triggers.

Steel slats
Curtain
Openings in fire walls
Use
Per tested shutter
Rating

اطلب عرض سعر

توردها World Steel مع مبناكم الفولاذي أو بشكل منفصل – طلبية واحدة، شحنة واحدة، شريك واحد.

نظرة عامة

حول Fire-rated roller shutters

Fire shutters are tested to EN 1634-1 and classified under EN 13501-2 (usually E or EW; EI needs insulated curtains), to UL 10B / NFPA 80 in North America and to AS 1530.4 with AS 1905.2 in Australia.

Release is by fire-alarm signal, fusible link or both, with gravity or motorised fail-safe closing; the opening must be kept clear of obstructions.

The shutter, guides and head box are fixed to the steel framing of the opening, which must itself be fire-protected for the rating.

المزايا الرئيسية

  • Closes large openings automatically
  • Fail-safe release on alarm or fusible link
  • Steel slats, guides and coil box
  • Tested with the wall type

World Steel · مركز غلاف المباني

كيف نستخدم Fire-rated roller shutters في المباني الفولاذية

World Steel designs the steel framing around shutter openings and protects it for the same fire rating.

Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.

  • 01يُحدَّد مع المنشأة – السماكة والكثافة والوجه مطابقة لتصميم السقف والجدران والحماية من الحريق.
  • 02الكميات مأخوذة من النموذج ثلاثي الأبعاد ذاته للفولاذ والمدادات والتكسية.
  • 03يُعبأ ويُشحن مع حزمة الفولاذ – جدول تسليم واحد إلى الموقع.

التطبيقات

أين يُستخدم Fire-rated roller shutters

  • Conveyor and loading openings in fire walls
  • Counters and service hatches
  • Warehouse compartment openings

البيانات الفنية

Fire-rated roller shutters – الخصائص الفنية

Typical properties and standards

الخاصيةالوحدةالقيمة
Fire test—EN 1634-1 · UL 10B / NFPA 80 · AS 1530.4
Product standard—EN 13241 (industrial doors) · AS 1905.2 (fire-resistant shutters)
Classification—EN 13501-2 – E, EW, EI
Release—Fire alarm interface and / or fusible link, fail-safe closing

القيم كما نشرتها الشركة المصنّعة لهذا السوق. تحققوا دائماً من صحيفة البيانات الحالية والاعتمادات المطلوبة لمشروعكم قبل الطلب.

FAQ

الأسئلة المتكررة

Does a fire shutter stop heat?

Most shutters are integrity-rated (E or EW); insulated (EI) shutters exist but are thicker – the code decides which class is needed.

Is this product certified?

Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.

شريك واحد للهيكل والغلاف

أرسلوا إلينا مخططاتكم أو جدول الكميات – نسعّر الفولاذ والعزل والألواح والأسقف المعلقة معاً ونشحنها كحزمة واحدة.

اطلب عرض سعر +84 902 881 833