Xây dựng niềm tin, Bảo đảm thành công Cổng khách hàng dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success
Fire-rated roller shutters – illustration

Hình sản phẩm: nhà sản xuất (chính thức).

Fire shutters · openings

Fire-rated roller shutters

Large openings stay open for traffic and close automatically when the fire alarm or a fusible link triggers.

Steel slats
Curtain
Openings in fire walls
Use
Per tested shutter
Rating

Yêu cầu báo giá

World Steel cung cấp cùng nhà thép của bạn hoặc riêng lẻ – một đơn hàng, một lô hàng, một đối tác.

Tổng quan

Giới thiệu Fire-rated roller shutters

Fire shutters are tested to EN 1634-1 and classified under EN 13501-2 (usually E or EW; EI needs insulated curtains), to UL 10B / NFPA 80 in North America and to AS 1530.4 with AS 1905.2 in Australia.

Release is by fire-alarm signal, fusible link or both, with gravity or motorised fail-safe closing; the opening must be kept clear of obstructions.

The shutter, guides and head box are fixed to the steel framing of the opening, which must itself be fire-protected for the rating.

Ưu điểm chính

  • Closes large openings automatically
  • Fail-safe release on alarm or fusible link
  • Steel slats, guides and coil box
  • Tested with the wall type

World Steel · trung tâm vật liệu bao che

Cách chúng tôi dùng Fire-rated roller shutters trong nhà thép

World Steel designs the steel framing around shutter openings and protects it for the same fire rating.

Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.

  • 01Chỉ định cùng kết cấu – độ dày, tỷ trọng và lớp mặt phù hợp thiết kế mái, vách và chống cháy.
  • 02Khối lượng bóc từ cùng mô hình 3D với thép, xà gồ và tôn bao che.
  • 03Đóng gói và vận chuyển cùng gói thép – một tiến độ giao hàng đến công trường.

Ứng dụng

Fire-rated roller shutters được dùng ở đâu

  • Conveyor and loading openings in fire walls
  • Counters and service hatches
  • Warehouse compartment openings

Thông số kỹ thuật

Fire-rated roller shutters – thông số kỹ thuật

Typical properties and standards

Thông sốĐơn vịGiá trị
Fire test—EN 1634-1 · UL 10B / NFPA 80 · AS 1530.4
Product standard—EN 13241 (industrial doors) · AS 1905.2 (fire-resistant shutters)
Classification—EN 13501-2 – E, EW, EI
Release—Fire alarm interface and / or fusible link, fail-safe closing

Số liệu theo công bố của nhà sản xuất cho thị trường này. Luôn kiểm tra tài liệu kỹ thuật mới nhất và chứng nhận dự án yêu cầu trước khi đặt hàng.

FAQ

Câu hỏi thường gặp

Does a fire shutter stop heat?

Most shutters are integrity-rated (E or EW); insulated (EI) shutters exist but are thicker – the code decides which class is needed.

Is this product certified?

Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.

Một đối tác cho kết cấu và bao che

Gửi bản vẽ hoặc bảng khối lượng – chúng tôi báo giá thép, cách nhiệt, tấm và trần cùng lúc và giao chung một lô hàng.

Yêu cầu báo giá +84 902 881 833