ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
Immagini dei prodotti: il produttore (ufficiali).
Thick-film · hydrocarbon
Epoxy intumescent coating (hydrocarbon fire)
A hard, durable thick-film epoxy system for process plants, pipe racks, LNG and offshore structures exposed to hydrocarbon pool and jet fires.
- Hydrocarbon / jet fire
- Fire type
- H60 – H180 / J-ratings
- Typical rating
- Exterior, C5 / CX
- Exposure
Fornito da World Steel con il vostro edificio in acciaio o separatamente – un ordine, una spedizione, un partner.
Panoramica
Informazioni su Epoxy intumescent coating (hydrocarbon fire)
Built up in several millimetres, often with reinforcement mesh at corners and edges.
Forms a hard, dense char that resists the turbulence of hydrocarbon and jet fires.
Part of a corrosion-protection system with primer and topcoat.
Vantaggi principali
- Hydrocarbon and jet-fire protection in one system
- Very high durability, impact and weather resistance
- Corrosion protection and fire protection together
- Lighter than concrete or heavy sprays
World Steel · hub per l'involucro edilizio
Come utilizziamo Epoxy intumescent coating (hydrocarbon fire) negli edifici in acciaio
World Steel can apply the primer and intumescent coating in our blasting and painting shop, so members arrive at site already fire-protected – thickness per member from the fire engineer's schedule, recorded in the coating report.
- 01Specificato insieme alla struttura – spessore, densità e rivestimento adeguati al progetto di copertura, pareti e antincendio.
- 02Quantità ricavate dallo stesso modello 3D di acciaio, arcarecci e rivestimenti.
- 03Imballato e spedito con il pacchetto acciaio – un unico programma di consegna in cantiere.
Applicazioni
Dove si usa Epoxy intumescent coating (hydrocarbon fire)
- Oil & gas, petrochemical and LNG plants
- Pipe racks, vessel skirts, process modules
- Offshore and coastal industrial structures
Dati tecnici
Epoxy intumescent coating (hydrocarbon fire) – proprietà tecniche
Typical properties
| Proprietà | Unità | Valore |
|---|---|---|
| Fire curve | — | Hydrocarbon (UL 1709 / EN 1363-2 HC); jet fire (ISO 22899-1) |
| Typical rating range | min | 60 – 180 |
| Typical thickness | mm | several mm, member-specific |
| Environment | — | Exterior C5 – CX, offshore |
Valori pubblicati dal produttore per questo mercato. Prima dell'ordine verificate sempre la scheda tecnica aggiornata e le approvazioni richieste per il vostro progetto.
Hydrocarbon fires (epoxy)
Prodotti correlati
Thin-film · cellulosicWater-based intumescent coatingVedi prodotto →
Thin-film · cellulosicSolvent-based intumescent coatingVedi prodotto →Intumescent · exterior exposureExterior-grade intumescent systemsVedi prodotto →← Epoxy intumescent coatings for hydrocarbon firesIntumescent Fire Protection Coatings →
FAQ
Domande frequenti
What thickness of epoxy intumescent coating (hydrocarbon fire) do I need?
It depends on the member size (section factor), the critical temperature and the required fire rating – the fire engineer or the manufacturer's tested data gives a thickness for each member.
Does World Steel supply branded products?
Yes – we supply the brand and listed system your specification or authority requires. This page describes the product type.
Un unico partner per struttura e involucro
Inviateci i disegni o il computo metrico – quotiamo insieme acciaio, isolamento, lastre e controsoffitti e li spediamo in un unico pacchetto.