Epoxy intumescent coating (hydrocarbon fire) – illustration

製品画像：メーカー（公式）。

Thick-film · hydrocarbon

Epoxy intumescent coating (hydrocarbon fire)

A hard, durable thick-film epoxy system for process plants, pipe racks, LNG and offshore structures exposed to hydrocarbon pool and jet fires.

Hydrocarbon / jet fire
Fire type: H60 – H180 / J-ratings
Typical rating: Exterior, C5 / CX
Exposure

見積もりを依頼

World Steel が鉄骨建築と一括で、または単体で供給 – 一つの注文、一つの出荷、一つのパートナー。

概要

Epoxy intumescent coating (hydrocarbon fire)について

Built up in several millimetres, often with reinforcement mesh at corners and edges.

Forms a hard, dense char that resists the turbulence of hydrocarbon and jet fires.

Part of a corrosion-protection system with primer and topcoat.

主なメリット

Hydrocarbon and jet-fire protection in one system
Very high durability, impact and weather resistance
Corrosion protection and fire protection together
Lighter than concrete or heavy sprays

World Steel · 外装材ハブ

鉄骨建築におけるEpoxy intumescent coating (hydrocarbon fire)の活用

World Steel can apply the primer and intumescent coating in our blasting and painting shop, so members arrive at site already fire-protected – thickness per member from the fire engineer's schedule, recorded in the coating report.

01構造と一体で仕様決定 – 厚さ、密度、表面材を屋根・外壁・耐火設計に合わせます。
02数量は鉄骨、母屋、外装材と同じ 3D モデルから算出。
03鉄骨パッケージとともに梱包・出荷 – 現場への納入スケジュールは一つです。

用途

Epoxy intumescent coating (hydrocarbon fire)の用途

Oil & gas, petrochemical and LNG plants
Pipe racks, vessel skirts, process modules
Offshore and coastal industrial structures

技術データ

Epoxy intumescent coating (hydrocarbon fire) – 技術特性

Typical properties

特性	単位	値
Fire curve	—	Hydrocarbon (UL 1709 / EN 1363-2 HC); jet fire (ISO 22899-1)
Typical rating range	min	60 – 180
Typical thickness	mm	several mm, member-specific
Environment	—	Exterior C5 – CX, offshore

この市場向けにメーカーが公表している値です。ご注文前に必ず最新のデータシートと、プロジェクトに必要な認定をご確認ください。

Hydrocarbon fires (epoxy)

よくある質問

What thickness of epoxy intumescent coating (hydrocarbon fire) do I need?

It depends on the member size (section factor), the critical temperature and the required fire rating – the fire engineer or the manufacturer's tested data gives a thickness for each member.

Does World Steel supply branded products?

Yes – we supply the brand and listed system your specification or authority requires. This page describes the product type.

構造と外装を一つのパートナーで

図面または数量明細書をお送りください – 鉄骨、断熱材、ボード、天井材をまとめて見積り、一つのパッケージで出荷します。

見積もりを依頼 +84 902 881 833