Epoxy intumescent coating (hydrocarbon fire) – illustration

제품 이미지: 제조사(공식).

Thick-film · hydrocarbon

Epoxy intumescent coating (hydrocarbon fire)

A hard, durable thick-film epoxy system for process plants, pipe racks, LNG and offshore structures exposed to hydrocarbon pool and jet fires.

Hydrocarbon / jet fire
Fire type: H60 – H180 / J-ratings
Typical rating: Exterior, C5 / CX
Exposure

견적 요청

World Steel이 철골 건축물과 함께 또는 단독으로 공급 – 하나의 주문, 하나의 선적, 하나의 파트너.

개요

Epoxy intumescent coating (hydrocarbon fire) 소개

Built up in several millimetres, often with reinforcement mesh at corners and edges.

Forms a hard, dense char that resists the turbulence of hydrocarbon and jet fires.

Part of a corrosion-protection system with primer and topcoat.

주요 장점

Hydrocarbon and jet-fire protection in one system
Very high durability, impact and weather resistance
Corrosion protection and fire protection together
Lighter than concrete or heavy sprays

World Steel · 건물 외피 허브

철골 건축물에서의 Epoxy intumescent coating (hydrocarbon fire) 활용 방식

World Steel can apply the primer and intumescent coating in our blasting and painting shop, so members arrive at site already fire-protected – thickness per member from the fire engineer's schedule, recorded in the coating report.

01구조물과 함께 사양 결정 – 두께, 밀도, 면재를 지붕, 벽 및 내화 설계에 맞춥니다.
02철골, 퍼린, 외장재와 동일한 3D 모델에서 물량을 산출합니다.
03철골 패키지와 함께 포장·선적 – 현장까지 하나의 납품 일정.

용도

Epoxy intumescent coating (hydrocarbon fire)의 사용처

Oil & gas, petrochemical and LNG plants
Pipe racks, vessel skirts, process modules
Offshore and coastal industrial structures

기술 데이터

Epoxy intumescent coating (hydrocarbon fire) – 기술 특성

Typical properties

특성	단위	값
Fire curve	—	Hydrocarbon (UL 1709 / EN 1363-2 HC); jet fire (ISO 22899-1)
Typical rating range	min	60 – 180
Typical thickness	mm	several mm, member-specific
Environment	—	Exterior C5 – CX, offshore

해당 시장용으로 제조사가 공개한 값입니다. 주문 전 항상 최신 데이터 시트와 프로젝트에 필요한 승인 사항을 확인하세요.

Hydrocarbon fires (epoxy)

자주 묻는 질문

What thickness of epoxy intumescent coating (hydrocarbon fire) do I need?

It depends on the member size (section factor), the critical temperature and the required fire rating – the fire engineer or the manufacturer's tested data gives a thickness for each member.

Does World Steel supply branded products?

Yes – we supply the brand and listed system your specification or authority requires. This page describes the product type.

구조와 외피를 위한 하나의 파트너

도면 또는 물량 내역서를 보내주시면 철골, 단열재, 보드, 천장재를 함께 견적하여 하나의 패키지로 선적합니다.

견적 요청 +84 902 881 833