Costruire fiducia, garantire il successo Area clienti
dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success

WS steel doors, frames & roll-up doors

Weld-in steel doors for shipping containers

All-in-one pre-hung 20 gauge door and 16 gauge frame with a weld cap – placed in the cut container wall and welded in two steps. 3068, with or without vision lite.

Stati UnitiEuropa

Richiedi un preventivo Specifiche

Red weld-in steel door in a converted shipping container
Container door with 10 × 10 vision lite3068 container door with 10 × 10 in lite.
  • Pre-hung door and weld-in frame
  • Two steps: place in opening, weld
  • 3068 door, 41⅛ × 82 9/16 in rough opening
  • Deadbolt or invisible deadbolt prep
  • Polystyrene core, ADA threshold
  • Solid or with 10 × 10 in lite

Two steps, no tube frame

Converting a container usually means welding a heavy tube frame into the corrugated wall and then hanging a door. The weld-in container door replaces all of that: the frame has an outer weld cap and unfinished galvannealed weld surfaces, so the pre-hung unit is set flush against the opening and welded in place.

Container weld-in frame
Weld cap and fillet weld into the container wall – panel 5.

Specification

Container door
ItemValue
Rough opening41⅛ × 82 9/16 in
Door35¾ × 79⅛ × 1¾ in (3068), 20 ga galvannealed
Frame41⅛ × 82 9/16 × 3⅞ in, single rabbet, 16 ga, welded top corners
Preparation161 lock, deadbolt or invisible deadbolt (IDB), ASA strike
Hinges4½ in heavy duty, non-removable pin
ThresholdADA, 4¾ × ½ in; weatherstrip and sweep shipped loose
Weightabout 57 kg (126 lb)
OptionsRH or LH reverse, solid or 10 × 10 in vision lite

Norme e requisiti per mercato

I codici secondo cui World Steel progetta, fabbrica e documenta questo prodotto, con i principali requisiti geometrici e di carico in ciascun mercato.

Stati Uniti

  • ANSI/SDI A250.8Standard steel doors and frames (SDI-100)
  • ANSI/SDI A250.6Hardware reinforcings on steel doors and frames
  • ANSI/DHI A115 seriesHardware preparation in steel doors and frames
  • ASTM A653 / A924Galvannealed steel sheet A40 / A60
Accessibility
ADA threshold ½ in
Tutte le norme United States →

Europa

  • EN 14351-1Windows and external pedestrian doorsets – CE marking
  • EN 1192Doors – classification of strength requirements
Tutte le norme Europe →

Sintesi solo orientativa: prevalgono il capitolato di progetto, l'edizione del codice adottata e l'autorità competente.

Finiture

FinituraNorme / note
As suppliedUnfinished galvannealed – weld, then prime and paint with the container

Domande frequenti

Can the door be painted?

Yes – it ships unfinished so the weld area and the door can be primed and painted together with the container.

Contenuti correlati

Prodotti in acciaio

Modular site office with steel entrance doorsSteel doors & framesModular building doorsBronze aluminium sliding windowSteel doors & framesWindows
SoluzioniSteel doorsModular homes
SettoriCommercial

Progetti di riferimento

Prossimo progetto

Progettate una struttura in acciaio all'estero?

Inviateci i vostri disegni o il modello IFC – il nostro ufficio preventivi risponde con ambito di fabbricazione, tempistiche e prezzo reso a destino.

Richiedi un preventivo +84 902 881 833