نبني الثقة ونضمن النجاح بوابة العملاء dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success

WS steel doors, frames & roll-up doors

Weld-in steel doors for shipping containers

All-in-one pre-hung 20 gauge door and 16 gauge frame with a weld cap – placed in the cut container wall and welded in two steps. 3068, with or without vision lite.

الولايات المتحدةأوروبا

اطلب عرض سعر المواصفات

  • Pre-hung door and weld-in frame
  • Two steps: place in opening, weld
  • 3068 door, 41⅛ × 82 9/16 in rough opening
  • Deadbolt or invisible deadbolt prep
  • Polystyrene core, ADA threshold
  • Solid or with 10 × 10 in lite

Two steps, no tube frame

Converting a container usually means welding a heavy tube frame into the corrugated wall and then hanging a door. The weld-in container door replaces all of that: the frame has an outer weld cap and unfinished galvannealed weld surfaces, so the pre-hung unit is set flush against the opening and welded in place.

Container weld-in frame
Weld cap and fillet weld into the container wall – panel 5.

Specification

Container door
ItemValue
Rough opening41⅛ × 82 9/16 in
Door35¾ × 79⅛ × 1¾ in (3068), 20 ga galvannealed
Frame41⅛ × 82 9/16 × 3⅞ in, single rabbet, 16 ga, welded top corners
Preparation161 lock, deadbolt or invisible deadbolt (IDB), ASA strike
Hinges4½ in heavy duty, non-removable pin
ThresholdADA, 4¾ × ½ in; weatherstrip and sweep shipped loose
Weightabout 57 kg (126 lb)
OptionsRH or LH reverse, solid or 10 × 10 in vision lite

المعايير والمتطلبات حسب السوق

المعايير التي تصمم World Steel هذا المنتج وتصنّعه وتوثّقه وفقها – والمتطلبات الهندسية الرئيسية ومتطلبات الأحمال في كل سوق.

الولايات المتحدة

  • ANSI/SDI A250.8Standard steel doors and frames (SDI-100)
  • ANSI/SDI A250.6Hardware reinforcings on steel doors and frames
  • ANSI/DHI A115 seriesHardware preparation in steel doors and frames
  • ASTM A653 / A924Galvannealed steel sheet A40 / A60
Accessibility
ADA threshold ½ in
جميع معايير United States →

أوروبا

  • EN 14351-1Windows and external pedestrian doorsets – CE marking
  • EN 1192Doors – classification of strength requirements
جميع معايير Europe →

ملخص للاسترشاد فقط – تسري مواصفات المشروع وإصدار المعيار المعتمد والجهة المختصة.

التشطيبات

التشطيبالمعايير / ملاحظات
As suppliedUnfinished galvannealed – weld, then prime and paint with the container

الأسئلة المتكررة

Can the door be painted?

Yes – it ships unfinished so the weld area and the door can be primed and painted together with the container.

المشروع القادم

هل تخططون لمنشأة فولاذية في الخارج؟

أرسلوا إلينا مخططاتكم أو نموذج IFC – يرد فريق التسعير لدينا بنطاق التصنيع والجدول الزمني والسعر شاملاً التسليم.