ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
- Pre-hung door and weld-in frame
- Two steps: place in opening, weld
- 3068 door, 41⅛ × 82 9/16 in rough opening
- Deadbolt or invisible deadbolt prep
- Polystyrene core, ADA threshold
- Solid or with 10 × 10 in lite
Two steps, no tube frame
Converting a container usually means welding a heavy tube frame into the corrugated wall and then hanging a door. The weld-in container door replaces all of that: the frame has an outer weld cap and unfinished galvannealed weld surfaces, so the pre-hung unit is set flush against the opening and welded in place.
Specification
| Item | Value |
|---|---|
| Rough opening | 41⅛ × 82 9/16 in |
| Door | 35¾ × 79⅛ × 1¾ in (3068), 20 ga galvannealed |
| Frame | 41⅛ × 82 9/16 × 3⅞ in, single rabbet, 16 ga, welded top corners |
| Preparation | 161 lock, deadbolt or invisible deadbolt (IDB), ASA strike |
| Hinges | 4½ in heavy duty, non-removable pin |
| Threshold | ADA, 4¾ × ½ in; weatherstrip and sweep shipped loose |
| Weight | about 57 kg (126 lb) |
| Options | RH or LH reverse, solid or 10 × 10 in vision lite |
各市场标准与要求
World Steel 设计、加工本产品及编制文件所依据的规范——以及各市场的主要几何与荷载要求。
美国
- ANSI/SDI A250.8Standard steel doors and frames (SDI-100)
- ANSI/SDI A250.6Hardware reinforcings on steel doors and frames
- ANSI/DHI A115 seriesHardware preparation in steel doors and frames
- ASTM A653 / A924Galvannealed steel sheet A40 / A60
- Accessibility
- ADA threshold ½ in
欧洲
- EN 14351-1Windows and external pedestrian doorsets – CE marking
- EN 1192Doors – classification of strength requirements
摘要仅供参考——以项目技术规格书、所采用的规范版本及主管机构要求为准。
表面处理
| 表面处理 | 标准 / 备注 |
|---|---|
| As supplied | Unfinished galvannealed – weld, then prime and paint with the container |
常见问题
Can the door be painted?
Yes – it ships unfinished so the weld area and the door can be primed and painted together with the container.
