Roof & wall sheeting

WS curved and crimp-curved roof sheets

WS curved roof sheets for barrel and arched roofs, and crimp-curved sheets for curved eaves and ridges – roll-curved from standard trapezoidal profiles.

Hoa Kỳ Úc / NZ Châu Âu

Yêu cầu báo giá Thông số kỹ thuật

Arched barrel roof of curved steel sheets

Curved sheets – detail

Curved sheets

Barrel and arched roofs, canopies and walkways
Crimp-curved sheets for curved eaves and ridges
Made from standard WS trapezoidal profiles
Same coatings and colours as flat sheets

Curves without joints

Curved sheets turn a roof into an arch with no ridge joint – for canopies, walkways, sports halls and architectural roofs. Two methods are used:

Two ways to curve a sheet

Roll-curved (smooth) sheets – bent to a large radius for barrel roofs; chord length up to about 1.2 m per curved piece in the reference range, longer arches assembled from several sheets.
Crimp-curved sheets – crimped to a tight radius (minimum radius about 300 mm, minimum length about 560 mm) for curved eaves, ridges and bullnose details.

Achievable radii depend on profile, thickness and coating – confirm with our engineers before design.

Roof accessories including curved sheet — Curved sheets with matching trims and accessories.

Tiêu chuẩn và yêu cầu theo thị trường

Các quy chuẩn mà World Steel áp dụng để thiết kế, gia công và lập hồ sơ cho sản phẩm này – cùng các yêu cầu chính về hình học và tải trọng tại từng thị trường.

Hoa Kỳ

ASTM A653 / A792Galvanized / 55 % Al-Zn coated sheet
ASTM A755Coil-coated (pre-painted) metallic-coated sheet
AISI S100Cold-formed steel design
ASTM E1592 · UL 580Wind uplift testing of roof panels

Tất cả tiêu chuẩn United States →

Úc / NZ

AS 1397Metallic-coated steel sheet – G300 to G550, Z / AZ coatings
AS/NZS 2728Pre-finished / pre-painted sheet
AS 1562.1Design and installation of metal roof and wall cladding
AS 4040Methods of testing sheet roof and wall cladding (incl. cyclonic)

Tất cả tiêu chuẩn Australia & New Zealand →

Châu Âu

EN 10346Continuously hot-dip coated steel flat products
EN 10169Organic coated (pre-painted) steel flat products
EN 14782Self-supporting metal sheet for roofing and cladding – CE marking
EN 1993-1-3Cold-formed members and sheeting

Tất cả tiêu chuẩn Europe →

Nội dung chỉ mang tính tham khảo – chỉ dẫn kỹ thuật của dự án, phiên bản quy chuẩn được áp dụng và cơ quan có thẩm quyền là căn cứ quyết định.

Hoàn thiện bề mặt

Hoàn thiện bề mặt	Tiêu chuẩn / ghi chú
Zinc-aluminium (AZ) coated	AZ100–AZ150 · AS 1397 / ASTM A792 / EN 10346
Galvanized (Z)	Z180–Z275 · AS 1397 / ASTM A653 / EN 10346
Pre-painted	Polyester or SMP paint system on AZ / Z substrate · AS/NZS 2728 / ASTM A755 / EN 10169
Colours	Standard colour range; special colours on minimum order quantity

Câu hỏi thường gặp

Which radius can be achieved?

Crimp-curved sheets reach a minimum radius of about 300 mm; smooth roll-curved sheets need larger radii. The exact limit depends on profile and thickness.