Roof & wall sheeting

WS curved and crimp-curved roof sheets

WS curved roof sheets for barrel and arched roofs, and crimp-curved sheets for curved eaves and ridges – roll-curved from standard trapezoidal profiles.

米国豪州 / NZ 欧州

見積もりを依頼仕様

Arched barrel roof of curved steel sheets

Curved sheets – detail

Curved sheets

Barrel and arched roofs, canopies and walkways
Crimp-curved sheets for curved eaves and ridges
Made from standard WS trapezoidal profiles
Same coatings and colours as flat sheets

Curves without joints

Curved sheets turn a roof into an arch with no ridge joint – for canopies, walkways, sports halls and architectural roofs. Two methods are used:

Two ways to curve a sheet

Roll-curved (smooth) sheets – bent to a large radius for barrel roofs; chord length up to about 1.2 m per curved piece in the reference range, longer arches assembled from several sheets.
Crimp-curved sheets – crimped to a tight radius (minimum radius about 300 mm, minimum length about 560 mm) for curved eaves, ridges and bullnose details.

Achievable radii depend on profile, thickness and coating – confirm with our engineers before design.

Roof accessories including curved sheet — Curved sheets with matching trims and accessories.

市場別の規格と要求事項

World Steelが本製品の設計・製作・書類作成に適用する基準――および各市場における主な寸法・荷重要件。

米国

ASTM A653 / A792Galvanized / 55 % Al-Zn coated sheet
ASTM A755Coil-coated (pre-painted) metallic-coated sheet
AISI S100Cold-formed steel design
ASTM E1592 · UL 580Wind uplift testing of roof panels

United Statesの規格一覧 →

豪州 / NZ

AS 1397Metallic-coated steel sheet – G300 to G550, Z / AZ coatings
AS/NZS 2728Pre-finished / pre-painted sheet
AS 1562.1Design and installation of metal roof and wall cladding
AS 4040Methods of testing sheet roof and wall cladding (incl. cyclonic)

Australia & New Zealandの規格一覧 →

欧州

EN 10346Continuously hot-dip coated steel flat products
EN 10169Organic coated (pre-painted) steel flat products
EN 14782Self-supporting metal sheet for roofing and cladding – CE marking
EN 1993-1-3Cold-formed members and sheeting

Europeの規格一覧 →

参考用の概要です――プロジェクト仕様書、採用される基準の版、所轄官庁の判断が優先されます。

表面処理

表面処理	規格 / 備考
Zinc-aluminium (AZ) coated	AZ100–AZ150 · AS 1397 / ASTM A792 / EN 10346
Galvanized (Z)	Z180–Z275 · AS 1397 / ASTM A653 / EN 10346
Pre-painted	Polyester or SMP paint system on AZ / Z substrate · AS/NZS 2728 / ASTM A755 / EN 10169
Colours	Standard colour range; special colours on minimum order quantity

よくある質問

Which radius can be achieved?

Crimp-curved sheets reach a minimum radius of about 300 mm; smooth roll-curved sheets need larger radii. The exact limit depends on profile and thickness.