- 26 ga Grade 80 galvanised curtain
- Self-storage, commercial, large commercial
- Up to 18 ft wide (commercial)
- Windlock versions over 180 mph
- Anti-pry latch, cylinder option
- 16 – 24 standard colours
Three grades
| Grade | Use | Construction | Wind |
|---|---|---|---|
| RU-S | Self-storage, residential, sheds | Live axle, 9⅝ in drums, maintenance-free torsion springs, anti-padlock-open latch | 160 mph on 9 ft openings; windlock version |
| RU-C | Commercial and industrial | 12 in spiral drums on ball bearings, 10 ga bottom bar, dual 12 ga slide-bolt latches, up to 18 ft wide | by width; windlock version |
| RU-L | Large commercial – RV, boat, fleet | Torque-tube spring assembly, 8:1 chain hoist, 10 ga guides | 140 mph on 11 ft; over 180 mph with windlocks |
Curtain and finish
Curtains are roll-formed, factory-seamed sections of 26 gauge Grade 80 galvanised steel with a siliconized polyester finish, full-length felt strips at each drum for quiet operation, and a bottom bar with a pliable bulb seal and integrated blade astragal.
How to order
Measure the framed opening – width first, height second – and the headroom and side room available. For example a framed opening of 14'6" × 16'0" takes a 14'6" × 16'0" door. Send us the building drawings and we size the doors with the framed openings of the steel building.
시장별 표준 및 요구사항
World Steel이 본 제품의 설계, 제작, 문서화에 적용하는 기준 – 그리고 각 시장의 주요 형상 및 하중 요구사항.
미국
- IBCWind load per exposure and building risk category
- ASCE 7Minimum design loads – wind
- DASMA 108Wind load test for garage and rolling doors
호주 / 뉴질랜드
- AS/NZS 4505Garage doors and other large access doors
- AS/NZS 1170.2Wind actions
유럽
- EN 13241Industrial, commercial and garage doors – CE marking
- EN 12424Resistance to wind load – classification
참고용 요약입니다 – 프로젝트 시방서, 채택된 기준 판본 및 관할 기관의 요구가 우선합니다.
표면 처리
| 표면 처리 | 표준 / 비고 |
|---|---|
| Curtain | Siliconized polyester in 16 – 24 standard colours |
| Guides & bar | Galvanised, zinc-coated steel |
자주 묻는 질문
Do the springs need maintenance?
Storage-grade doors use coated, oil-tempered torsion springs that need no lubrication; tension is adjusted with a ratcheting wheel.
Which grade for a warehouse?
Commercial (RU-C) for typical loading bays and workshops; large commercial (RU-L) with chain hoist for wide, tall or high-wind openings.





