ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
- 26 ga Grade 80 galvanised curtain
- Self-storage, commercial, large commercial
- Up to 18 ft wide (commercial)
- Windlock versions over 180 mph
- Anti-pry latch, cylinder option
- 16 – 24 standard colours
Three grades
| Grade | Use | Construction | Wind |
|---|---|---|---|
| RU-S | Self-storage, residential, sheds | Live axle, 9⅝ in drums, maintenance-free torsion springs, anti-padlock-open latch | 160 mph on 9 ft openings; windlock version |
| RU-C | Commercial and industrial | 12 in spiral drums on ball bearings, 10 ga bottom bar, dual 12 ga slide-bolt latches, up to 18 ft wide | by width; windlock version |
| RU-L | Large commercial – RV, boat, fleet | Torque-tube spring assembly, 8:1 chain hoist, 10 ga guides | 140 mph on 11 ft; over 180 mph with windlocks |
Curtain and finish
Curtains are roll-formed, factory-seamed sections of 26 gauge Grade 80 galvanised steel with a siliconized polyester finish, full-length felt strips at each drum for quiet operation, and a bottom bar with a pliable bulb seal and integrated blade astragal.
How to order
Measure the framed opening – width first, height second – and the headroom and side room available. For example a framed opening of 14'6" × 16'0" takes a 14'6" × 16'0" door. Send us the building drawings and we size the doors with the framed openings of the steel building.
Tiêu chuẩn và yêu cầu theo thị trường
Các quy chuẩn mà World Steel áp dụng để thiết kế, gia công và lập hồ sơ cho sản phẩm này – cùng các yêu cầu chính về hình học và tải trọng tại từng thị trường.
Hoa Kỳ
- IBCWind load per exposure and building risk category
- ASCE 7Minimum design loads – wind
- DASMA 108Wind load test for garage and rolling doors
Úc / NZ
- AS/NZS 4505Garage doors and other large access doors
- AS/NZS 1170.2Wind actions
Châu Âu
- EN 13241Industrial, commercial and garage doors – CE marking
- EN 12424Resistance to wind load – classification
Nội dung chỉ mang tính tham khảo – chỉ dẫn kỹ thuật của dự án, phiên bản quy chuẩn được áp dụng và cơ quan có thẩm quyền là căn cứ quyết định.
Hoàn thiện bề mặt
| Hoàn thiện bề mặt | Tiêu chuẩn / ghi chú |
|---|---|
| Curtain | Siliconized polyester in 16 – 24 standard colours |
| Guides & bar | Galvanised, zinc-coated steel |
Câu hỏi thường gặp
Do the springs need maintenance?
Storage-grade doors use coated, oil-tempered torsion springs that need no lubrication; tension is adjusted with a ratcheting wheel.
Which grade for a warehouse?
Commercial (RU-C) for typical loading bays and workshops; large commercial (RU-L) with chain hoist for wide, tall or high-wind openings.
