ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
- 3070 doors, 18 gauge
- 161, mortise or panic-reinforced preps
- 16 ga 5¾ in masonry frames, LH or RH
- Labelled up to 3 hours
- 20 doors / 40 frames per pallet
- Interchangeable with WS HM frames
What it is
Most buildings repeat the same opening again and again. The fast-pack range covers that standard opening – a 3'0" × 7'0" door in 18 gauge steel with a matching 16 gauge masonry frame – prime painted and packed on pallets so it can be ordered by the pallet and delivered quickly.
Fast-pack frames are built to the same profile as WS hollow metal frames, so they can be mixed on one project: standard openings from stock, special openings made to order.
The range
| Item | Description | Preparation | Pallet |
|---|---|---|---|
| Door 3070 – 18 ga | Polystyrene core, steel top cap, 16 ga channels | 161 cylindrical lock | 20 doors |
| Door 3070 – 18 ga | Panic-reinforced blank door | Exit device | 20 doors |
| Door 3070 – 18 ga | Mortise edge | Mortise lock | 20 doors |
| Frame 5¾ in – 16 ga | Masonry, knock-down, mitred corners, base anchor | ASA strike, RH | 40 frames |
| Frame 5¾ in – 16 ga | Masonry, knock-down, mitred corners, base anchor | ASA strike, LH | 40 frames |
Specification
- Door: 18 gauge steel, polystyrene core, 16 gauge inverted top and bottom channels
- Fire rating: labelled up to 3 hours for door and frame
- Closer reinforcement: 14 gauge, standard
- Frame: 16 gauge, 5¾ in masonry depth, knock-down, precision mitred corners
- Hinge preparation: reinforced, standard commercial hinge locations
- Finish: gray primer
Tiêu chuẩn và yêu cầu theo thị trường
Các quy chuẩn mà World Steel áp dụng để thiết kế, gia công và lập hồ sơ cho sản phẩm này – cùng các yêu cầu chính về hình học và tải trọng tại từng thị trường.
Hoa Kỳ
- ANSI/SDI A250.8Standard steel doors and frames (SDI-100)
- ANSI/SDI A250.6Hardware reinforcings on steel doors and frames
- ANSI/DHI A115 seriesHardware preparation in steel doors and frames
- ASTM A653 / A924Galvannealed steel sheet A40 / A60
- NFPA 80 · UL 10CFire doors – installation and positive-pressure fire test
- Fire label
- 20 min to 3 h on a labelled door and frame
- Accessibility
- ADA / ICC A117.1 – threshold rise ≤ ½ in
Úc / NZ
- AS 1905.1Fire-resistant doorsets
- AS 1530.4Fire-resistance tests of elements
- NCC Volume OneEgress, fire separation and access
- AS 1428.1Design for access – door circulation and hardware
- Fire doorset
- door, frame and hardware tested as one assembly
Châu Âu
- EN 14351-1Windows and external pedestrian doorsets – CE marking
- EN 16034Fire and smoke resisting doorsets – CE marking
- EN 1634-1Fire resistance test for doorsets
- EN 1192Doors – classification of strength requirements
- CE marking
- Declaration of performance for each doorset type
Nội dung chỉ mang tính tham khảo – chỉ dẫn kỹ thuật của dự án, phiên bản quy chuẩn được áp dụng và cơ quan có thẩm quyền là căn cứ quyết định.
Hoàn thiện bề mặt
| Hoàn thiện bề mặt | Tiêu chuẩn / ghi chú |
|---|---|
| Prime coat | Baked-on rust-inhibitive primer to ANSI A250.10 – primer gray standard |
| Factory colours | Light gray, bronze, true white, bright white, off white |
Câu hỏi thường gặp
Can I mix fast-pack frames with made-to-order doors?
Yes. The frame profile and hinge locations match the WS hollow metal range, so stock and special openings can be combined on one project.
