WS electric wire rope hoists

Hoist types

Single-rail trolley hoist – runs on the bottom flange of a single girder or monorail (N, NR curved).
Low-headroom hoist – counterweight (LC) or balance wheel (LB) design for maximum hook height under single girders.
Double-rail trolley hoist – for double girder cranes (DU parallel / DX perpendicular).
Stationary (foot-mounted) hoist – fixed lifting points and winches (F).
Chain hoists – for light loads and workstations.

Standard products

WS electric wire rope hoists – standard products (lifting speed V1 / V2 in m/min: main / creep; hook travel H0–H3 in m)
Capacity (kg)	FEM	ISO	WS frame	Reeving	V1	V2	H0	H1	H2	H3
1,000	2m	M5	WH-205 / WH-305	2/1	8/2.6	12/4	10	14	20	26
1,250	3m	M6	WH-306	2/1	8/2.6	12/4	10	14	20	–
1,600	3m	M6	WH-304	4/1	4/1.3	6/2	–	7	10	13
1,600	2m	M5	WH-308	2/1	8/2.6	12/4	10	14	20	–
2,000	3m	M6	WH-310	2/1	8/2.6	12/4	10	14	20	–
2,000	2m	M5	WH-305	4/1	4/1.3	6/2	–	7	10	13
2,500	3m	M6	WH-313	2/1	8/2.6	12/4	10	14	20	–
2,500	3m	M6	WH-306	4/1	4/1.3	6/2	–	7	10	13
2,500	2m	M5	WH-312	2/1	8/2.6	12/4	10	14	20	–
3,200	2m	M5	WH-316	2/1	8/2.6	12/4	10	14	20	–
3,200	2m	M5	WH-308	4/1	4/1.3	6/2	–	7	10	13
4,000	3m	M6	WH-310	4/1	4/1.3	6/2	–	7	10	13
4,000	3m	M6	WH-520	2/1	8/2.6	12/4	10	14	20	–
5,000	3m	M6	WH-313	4/1	4/1.3	6/2	–	7	10	13
5,000	2m	M5	WH-312	4/1	4/1.3	6/2	–	7	10	13
5,000	2m	M5	WH-525	2/1	8/2.6	12/4	10	14	20	26
6,300	3m	M6	WH-732	2/1	8/2.6	12/1.8	14	19	26	–
6,300	2m	M5	WH-316	4/1	4/1.3	6/2	–	7	10	13
8,000	3m	M6	WH-520	4/1	4/1.3	6/2	–	7	10	13
8,000	2m	M5	WH-740	2/1	8/2.6	12/1.8	13	18	25	32
10,000	2m	M5	WH-525	4/1	4/1.3	6/2	–	7	10	13
10,000	1Am	M4	WH-750	2/1	5.5/1.3	8.3/2.7	13	18	25	–
10,000	2m	M5	WH-950	2/1	5/1.2	10/1.5	–	20	32	–
12,500	3m	M6	WH-732	4/1	4/1.3	6/0.9	6.5	9	12.5	16
16,000	2m	M5	WH-740	4/1	4/1.3	6/0.9	6.5	9	12.5	16
16,000	3m	M6	WH-940	4/1	2.5/0.6	5/0.75	–	10	16	24
20,000	1Am	M4	WH-750	4/1	2.8/0.7	4.1/1.3	6.5	9	12.5	16
20,000	2m	M5	WH-950	4/1	2.5/0.6	5/0.75	–	10	16	24
20,000	2m	M5	WH-1100	2/1	3/0.7	5/0.7	20	24	30	–
25,000	1Am	M4	WH-963	4/1	2.5/0.6	5/0.75	–	10	16	24
25,000	1Am	M4	WH-1125	2/1	3/0.7	5/0.7	20	24	30	–
32,000	1Am	M4	WH-980	4/1	2.5/0.6	3.7/0.6	–	10	16	24
32,000	1Am	M4	WH-980 (inverter)	4/1	3.7/1	0.5–5.0	–	10	16	24
40,000	2m	M5	WH-1100	4/1	1.5/0.35	2.5/0.35	10	12	15	22
40,000	2m	M5	WH-1100 (inverter)	4/1	2.5/0.8	0.4–4.0	10	12	15	22
50,000	1Am	M4	WH-1125	4/1	1.5/0.35	2.5/0.35	10	12	15	22
50,000	1Am	M4	WH-1125 (inverter)	4/1	2/0.6	0.3–3.0	10	12	15	22

Inverter versions have stepless speed. Single-speed hoists and other speeds on request.

Hoist travel speed (m/min), capacity to 16 t
Trolley type	Speed
Monorail electric trolley, standard headroom	20/6.5
Monorail electric trolley, low headroom	20/5
Double-rail trolley	20/6 up to 16 t · 16/5 above 16 t

Standard and optional

Standard and optional equipment
Item	Standard	Optional
Motors	Dual-speed motors	Inverter control
Speeds	Standard table V1, V2	Other speeds
Lifting height	7–26 m	Up to 80 m (by capacity)
Power supply	3-phase AC 400 V / 50 Hz	415 V, 480 V, 500 V, 60 Hz
Control	Control panel + 6-button pendant	Radio remote, other pendants
Control voltage	48 V	24, 42, 110, 220 V
Temperature	−20 … +40 °C	−40 °C, +50 °C, +60 °C
Humidity	< 80 %	> 80 %
Protection	IP54	IP65, IP66
Monorail	Straight	Curved, radius ≥ 1.5 m
Reeving	2/1, 4/1	True vertical lift 4/2

Type code

Reading the code 5 WH312 H10 V4 4/1 M LC 52 20/5 F
Field	Meaning
5	Capacity in tonnes
WH 312	Hoist frame: size 3, drum force 12 kN
H10	Hook travel, m
V4	Lifting speed, m/min (50 Hz)
4/1	Reeving (rope falls)
M	Speed type: M micro · D double · S single · I inverter
LC	Mounting: F foot · N normal headroom · NR curved · LC / LB low headroom · DU / DX double-rail trolley
52	Electrical: 20 e-stop + thermal · 21 + key · 52 load limiter + e-stop + thermal · 53 + key
20/5	Trolley speed, m/min
F	Climate: – standard · F cold · G high temp. · T tropical · X chemical

Duty group

Vietnam: cranes are designed, manufactured and inspected to TCVN 4244:2005 and the lifting-equipment safety regulation QCVN 07:2012/BLĐTBXH, with technical inspection before use.

Tiêu chuẩn và yêu cầu theo thị trường

Các quy chuẩn mà World Steel áp dụng để thiết kế, gia công và lập hồ sơ cho sản phẩm này – cùng các yêu cầu chính về hình học và tải trọng tại từng thị trường.

Hoa Kỳ

CMAA 70 / CMAA 74Top-running and single girder crane specifications
ASME B30.2 · B30.17Overhead and gantry cranes – safety
ASME B30.16 · ASME HST-4Overhead hoists
OSHA 1910.179Overhead and gantry cranes

Load test: 125 % of rated load (ASME B30.2)

Tất cả tiêu chuẩn United States →

Úc / NZ

AS 1418.1Cranes – general requirements
AS 1418.18Crane runways and monorails
AS 2550.1Cranes – safe use
AS 4100 · AS/NZS 1554.1Steel design and welding

Registration: Design and item registration per state WHS rules

Tất cả tiêu chuẩn Australia & New Zealand →

Châu Âu

EN 15011Bridge and gantry cranes
EN 14492-2Power-driven hoists
EN 13001 seriesCrane design – general, actions, limit states
Machinery DirectiveCE marking of the complete crane

Load test: Static 125 % and dynamic 110 % per EN 15011 / EN 14492-2

Tất cả tiêu chuẩn Europe →

Nội dung chỉ mang tính tham khảo – chỉ dẫn kỹ thuật của dự án, phiên bản quy chuẩn được áp dụng và cơ quan có thẩm quyền là căn cứ quyết định.

Hoàn thiện bề mặt

Hoàn thiện bề mặt	Tiêu chuẩn / ghi chú
Paint	Blast cleaned, epoxy primer + polyurethane topcoat in safety yellow or project colour
Marking	Rated capacity and safety slogans on the girder in the client's language
Environment	Tropical, cold, high-temperature or chemical execution for hoists

Câu hỏi thường gặp

What does 4/1 reeving mean?

Four rope falls on one rope end at the drum: double the capacity of 2/1 at half the lifting speed and hook travel.

Which hoist for maximum hook height?

A low-headroom (LC or LB) hoist on single girder cranes, or a double-rail trolley between the girders of a double girder crane.

Thông số kỹ thuật

Capacity

1–50 t

Duty

FEM 1Am, 2m, 3m · ISO M4, M5, M6

Reeving

2/1, 4/1; 4/2 true vertical lift optional

Lifting height

7–26 m standard, up to 80 m

Power

3-phase 400 V / 50 Hz; 415–500 V, 60 Hz optional

Control voltage

48 V; 24–220 V optional

Protection

IP54; IP65 / IP66 optional

Temperature

−20 … +40 °C; −40 … +60 °C options

Hồ sơ cung cấp

General arrangement, girder and runway load drawings

Calculation of girder, end carriages and wheel loads

Mill certificates for girder and end carriage steel

Weld inspection and NDT records

Hoist and component certificates, wiring diagrams

Factory function test, site static and dynamic load test reports

Operation and maintenance manual, spare parts list

Để nhận báo giá, vui lòng gửi cho chúng tôi

Capacity, span, lifting height and hook approach

Duty group (FEM / ISO, CMAA or AS 1418)

Building drawings: runway level, column grid, clearances

Speeds, control (pendant / radio) and power supply

Indoor or outdoor, temperature, dust or corrosive environment

Destination code and inspection authority

Yêu cầu báo giá