ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
- Panels assembled flat, delivered ready to stand
- Studs at 400 / 600 mm, stud over stud
- Lintels, jamb studs and cripples at openings
- Strap or sheet bracing for wind and seismic
- Hold-downs and anchors to the slab
- Openings and services set out from the model
How a wall panel works
Vertical loads flow down the studs to the bottom track and the slab; lateral loads from wind and earthquakes are carried by braced panels – diagonal steel straps or structural sheathing – into hold-downs and anchors. Openings are framed with jamb studs and a lintel.
Panel components
| Member | Typical section | Notes |
|---|---|---|
| Studs | C 89 – 150, 0.75 – 1.6 mm | 400 / 600 mm centres |
| Top and bottom tracks | U to suit stud | screw-fixed to each stud |
| Noggings / bridging | C or U | mid-height restraint and fixings |
| Lintels | back-to-back C, boxed | over doors and windows |
| Bracing | flat strap or sheathing | with tensioners and hold-downs |
| Anchors | chemical / mechanical / cast-in | to concrete slab or steel beam |
Envelope
Fire, acoustic and thermal performance come from the tested lining and insulation system around the frame – we detail the walls to the board and insulation manufacturers' tested systems.
Tiêu chuẩn và yêu cầu theo thị trường
Các quy chuẩn mà World Steel áp dụng để thiết kế, gia công và lập hồ sơ cho sản phẩm này – cùng các yêu cầu chính về hình học và tải trọng tại từng thị trường.
Hoa Kỳ
- AISI S100Cold-formed steel structural members
- AISI S240Cold-formed steel structural framing
- ASTM A1003 / C955Sheet steel and load-bearing studs
- IBC Ch. 22Steel – cold-formed framing
- Coating
- G60 (Z180) minimum for structural framing members
Úc / NZ
- AS/NZS 4600Cold-formed steel structures
- NASH StandardResidential and low-rise steel framing, Parts 1 & 2
- AS 1397Steel sheet and strip – G550, Z / AZ coatings
- NCCBuilding Code of Australia
- Corrosion
- coating class to NASH / AS 4312 exposure
Châu Âu
- EN 1993-1-3Cold-formed members and sheeting
- EN 1090-4Execution of cold-formed structural elements
- EN 10346Continuously hot-dip coated steel – S350GD – S550GD
- EN 1993-1-1General rules
- CE
- EN 1090-1 for structural kits
Nội dung chỉ mang tính tham khảo – chỉ dẫn kỹ thuật của dự án, phiên bản quy chuẩn được áp dụng và cơ quan có thẩm quyền là căn cứ quyết định.
Hoàn thiện bề mặt
| Hoàn thiện bề mặt | Tiêu chuẩn / ghi chú |
|---|---|
| Frame | Z275 / AZ150 coated |
