ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
ROCKWOOL 製品画像：ROCKWOOL（公式）。
ROCKWOOL · Conlit® fire stopping
ROCKWOOL Rocksafe Plus
Rocksafe products are developed to be used as a fire protection to curtain wall applications.
- 0.035 W/m·K
- Thermal conductivity λ
- Euroclass A1
- Reaction to fire (EN 13501-1)
- 0.500 kg/m²
- Water absorption
World Steel が鉄骨建築と一括で、または単体で供給 – 一つの注文、一つの出荷、一つのパートナー。
概要
Rocksafe Plusについて
Rocksafe Plus products are developed to be used as a fire protection to curtain wall applications. The key application is in sealing of any openings in non-visible areas such as those between the curtain wall and the perimeter edge of the floor slab. This can prevent fire spread and maintain the fire compartment on each floor of the building in an event of fire.
Application: Key application in sealing of any openings in non-visible areas such as those between the curtain wall and the perimeter edge of the floor slab.
主なメリット
- Rocksafe products are specially developed to provide fire protection to the systems they are applied to.
- They are manufactured from long fine fibres, spun from molten natural rock, bonded with thermosetting resin.
- The uniquely formulated contents in the product makes it slightly greyish in colour, ensuring stability of the fibre structures and provides a rigid surface when exposed directly to heat during a fire.
- The products have remarkable resistance to shrinkage at temperatures encountered in fire conditions.
- Rocksafe products has been subjected to fire resistance test in accordance to BS476 Part 20, in accredited laboratory and achieved two hours fire rating, meeting the integrity and insulation criteria.
- In this fire test, Rocksafe Plus of 135mm thickness has been compressed to at least 15% of its total width and fitted into the various openings of the concrete floor slab.
World Steel · 外装材ハブ
鉄骨建築におけるRocksafe Plusの活用
Every service penetration through a fire-rated wall or floor needs a tested seal. World Steel supplies ROCKWOOL Rocksafe Plus with the steel structure and building envelope, so fire-stopping, insulation and boards for the project come from one partner – always installed to the manufacturer's tested details.
- 01構造と一体で仕様決定 – 厚さ、密度、表面材を屋根・外壁・耐火設計に合わせます。
- 02数量は鉄骨、母屋、外装材と同じ 3D モデルから算出。
- 03鉄骨パッケージとともに梱包・出荷 – 現場への納入スケジュールは一つです。
用途
Rocksafe Plusの用途
- Passive Fire Protection › Fire Penetration
- External Wall Insulation › Cavity Wall Insulation
技術データ
Rocksafe Plus – 技術特性
Thermal conductivity
| 特性 | 単位 | 値 |
|---|---|---|
| Thermal conductivity | W/m·K | 0.035 |
Technical properties
| 特性 | 単位 | 値 |
|---|---|---|
| Reaction to Fire | Euroclass | A1 |
| Water Absorption | kg/m2 | 0.500 |
| Water Vapour Absorption | % | 0.04 |
この市場向けにメーカーが公表している値です。ご注文前に必ず最新のデータシートと、プロジェクトに必要な認定をご確認ください。 メーカーのページ ↗
Fire stopping (Conlit®)
関連製品
ROCKWOOLConlit® fire stoppingConlit® Pipe Collar製品を見る →
ROCKWOOLConlit® fire stoppingConlit® Intumescent Pipewrap製品を見る →
ROCKWOOLConlit® fire stoppingConlit® Intumescent Pipewrap Roll製品を見る →
ROCKWOOLConlit® fire stoppingConlit® Intumescent Putty Pad製品を見る →
ROCKWOOLConlit® fire stoppingConlit® High Expansion Intumescent Sealant製品を見る →
ROCKWOOLConlit® fire stoppingConlit® Acoustic Intumescent Sealant製品を見る →
ROCKWOOLConlit® fire stoppingConlit® Fire Resistant Silicone Sealant製品を見る →
ROCKWOOLConlit® fire stoppingConlit® LITE Firestop Compound製品を見る →← ROCKWOOL Conlit® fire stopping and passive fire protectionROCKWOOL Stone Wool Insulation →
FAQ
よくある質問
What does ROCKWOOL Rocksafe Plus do?
It is part of the ROCKWOOL Conlit® fire-stopping range that reinstates the fire resistance of walls and floors where services pass through.
How is the fire rating achieved?
Only by installing the product exactly as in the tested and approved system – check the data sheet and the system details for your wall or floor type.