ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
欧州
- F3125 F1852 (Group 120) and F2280 (Group 150)
- EN 14399-10 HRC, JSS II 09 S10T
- Installed from one side, by one worker
- Spline shears off at the design tension
- Visual inspection of every bolt
- Quiet electric shear wrench
How it works
A TC bolt has a domed head and a splined end. The shear wrench holds the spline and turns the nut; when the bolt tension reaches the calibrated value the spline twists off at its groove. A missing spline is a visible, permanent record that the bolt was tensioned.
TC bolts save time on large bolted structures – multi-storey frames, bridges and long-span roofs – and remove impact-wrench noise from the site.
Grades
| Standard | Grade | Strength | Market |
|---|---|---|---|
| ASTM F3125 F1852 | Group 120 | 120 ksi | US |
| ASTM F3125 F2280 | Group 150 | 150 ksi | US |
| EN 14399-10 | HRC 10.9 | 1040 MPa | Europe |
| JSS II 09 | S10T | 1000 MPa | Japan, Asia |
| GB/T 3632 | 10.9S | 1040 MPa | China |
Installation notes
- Pre-installation verification of each lot in a tension calibrator
- Keep bolts in their sealed containers – lubrication controls the tension
- Snug all bolts first, then twist off in a pattern from the stiffest part of the joint
- Do not re-use bolts that have been tensioned
市場別の規格と要求事項
World Steelが本製品の設計・製作・書類作成に適用する基準――および各市場における主な寸法・荷重要件。
米国
- ASTM F3125Grades F1852 / F2280
- RCSC 2020Twist-off-type tension-control bolt pretensioning
参考用の概要です――プロジェクト仕様書、採用される基準の版、所轄官庁の判断が優先されます。
表面処理
| 表面処理 | 規格 / 備考 |
|---|---|
| Plain / black | Oiled, for painted or indoor connections |
| Mechanical zinc | F1852 (Group 120) only |
