ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
米国
- ISO 4014 part thread · ISO 4017 full thread
- Classes 4.6, 5.6, 8.8, 10.9 (ISO 898-1)
- M6 – M64, coarse and fine pitch
- Nuts ISO 4032 / 4033, washers ISO 7089 / 7091
- Zinc plated, HDG, black or stainless A2 / A4
- JIS, GB and TCVN equivalents
What it is
General-purpose metric hexagon bolts carry secondary members, equipment, handrails, grating clips and non-preloaded connections. The property class stamped on the head – 4.6, 8.8, 10.9 – gives the tensile strength (first number × 100 MPa) and the yield ratio (second number ÷ 10).
Mechanical properties
| Size | Pitch | As (mm²) | 4.6 | 8.8 | 10.9 |
|---|---|---|---|---|---|
| M12 | 1.75 | 84.3 | 33.7 | 67.4 | 87.7 |
| M16 | 2.0 | 157 | 62.8 | 126 | 163 |
| M20 | 2.5 | 245 | 98.0 | 203 | 255 |
| M24 | 3.0 | 353 | 141 | 293 | 367 |
| M30 | 3.5 | 561 | 224 | 466 | 583 |
| M36 | 4.0 | 817 | 327 | 678 | 850 |
| M42 | 4.5 | 1120 | 448 | 930 | 1165 |
| M48 | 5.0 | 1470 | 588 | 1220 | 1529 |
8.8: fu = 800 MPa up to M16, 830 MPa above. Values are minimum ultimate loads As × fu – design resistance comes from the design code.
Equivalents
ISO 4014 / 4017 correspond to the withdrawn DIN 931 / 933, to EN ISO 4014 / 4017, JIS B 1180, GB/T 5782 / 5783 and TCVN 1916 in Vietnam. Head across-flats differ slightly between ISO and DIN for M10, M12, M14 and M22.
市場別の規格と要求事項
World Steelが本製品の設計・製作・書類作成に適用する基準――および各市場における主な寸法・荷重要件。
欧州
- EN ISO 4014 / 4017Hexagon head bolts and screws
- EN ISO 898-1Mechanical properties
- EN 15048Non-preloaded structural bolting assemblies
豪州 / NZ
- AS 1111.1ISO metric hexagon bolts – commercial
- AS 1110Precision hexagon bolts
参考用の概要です――プロジェクト仕様書、採用される基準の版、所轄官庁の判断が優先されます。
表面処理
| 表面処理 | 規格 / 備考 |
|---|---|
| Zinc plated | ISO 4042 |
| Hot-dip galvanized | ISO 10684 |
| Plain / black | Oiled, for painted or indoor connections |
| Stainless | A2-70 / A4-80 (ISO 3506) |
